DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Windows and Doors > Bifold doors





Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 03-25-2008, 02:08 PM  
learning
Junior Member
 
Join Date: Jan 2008
Posts: 11
Default Bifold doors

I'm not sure if this thread belongs here, but what the hell.

I have a utility closet adjacent to my kitchen; its a big closet containing the washer, dryer, furnance, waterheater, etc. There are two seperate openings seperated by a column. So I have a double set of 36 wide bifold doors that make up an entire wall in the kitchen. The door are in bad shape and i need to replace them.

I'd like to do something nice, but all the bifolds that i've seen are wood (the kitchen floor and cabinents are already wood) or primed white. I'm worried about painting primed doors. I might consider spray painting the doors, but they must be half louvered to provide ventilation. I would add french doors but i would still need the ventilation.

Any thoughts on painting the primed doors? Other half louvered door thoughts?

Thanks.



__________________
learning is offline  
 
Reply With Quote Quick reply to this message
Old 03-25-2008, 05:00 PM  
Square Eye
Senior Member
 
Square Eye's Avatar
 
Join Date: Jan 2006
Posts: 1,273
Liked 4 Times on 4 Posts

Default

You can get a good finish on primered louvered doors if you take your time. The primer actually makes it easier to paint because you'll need less paint to get a good finish. Using a brush is aggrevating because it is so easy to get a run on the backside. You can't see until it's too late PLUS, it's hard to get in the area between the louvers on some doors. A sprayer is the best way to go, with light coats. But it seems to me that with all of the wood in that room, it would look better to stain and poly a wood door. ??

__________________

[URL="http://www.houserepairtalk.com/announcement.php?f=39&a=6"][size=3]The Ten Commandments of House Repair Talk[/size][/URL]



[URL="http://home.bellsouth.net/p/s/community.dll?ep=16&groupid=289528&ck="]Square Eye's home page[/URL]

Square Eye is offline  
 
Reply With Quote Quick reply to this message
Old 03-25-2008, 05:59 PM  
inspectorD
Housebroken
HRT_MODERATOR.png
 
inspectorD's Avatar
 
Join Date: Dec 2005
Location: Litchfield, CT
Posts: 3,910
Liked 83 Times on 72 Posts
Likes Given: 165

Default New idea.

This is the new stuff I have been seeing, only folks did it in the 1800's
There is a cool way to vent the room and with your situation it may work.
Folks on a recent job had a similar issue. We installed some regular doors, then made a vent for over the door. Kind of like the old windows folks used to have in thier homes which they could tilt open. But this was a couple of metal louvers painted the same color as the wall, in the header space and facing up. We did the math and it was plenty of ventilation for the room....and no vented door.
Just another option if you have room over door and no solid header. It looked nice.

__________________

Just My
Made in the

inspectorD is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
patio doors and security John7447 General Home Improvement Discussion 1 06-06-2008 05:38 PM
help! non-standard sized doors too small for non-standard sized doorframes... buddyreid Windows and Doors 4 03-29-2008 10:53 AM
Painting Doors eastwood Windows and Doors 1 06-03-2007 07:05 PM
Warped doors and doorways? WestBentley Carpentry and Woodworking 3 03-06-2007 06:19 AM