DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Windows and Doors > disassembling a single hung window




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 06-26-2010, 10:03 PM  
bwildered
Home owner
 
Join Date: Apr 2010
Location: Denver, Colorado
Posts: 2
Default disassembling a single hung window

I have one in the garage, and it collects all kinds of dead insects. I would like to clean it from time to time, but cannot get at the inside of the frame and bristle like weather stripping. I can figure out the sliders in the basement, but the vinyl single hung in ther garage has me stumped. It seems to have springs on either side of the slider. Assistance is appreciated.

Bwild......



__________________
bwildered is offline  
 
Reply With Quote Quick reply to this message
Old 06-27-2010, 06:38 AM  
oldognewtrick
Moderator
HRT_MODERATOR.png
 
oldognewtrick's Avatar
 
Join Date: Jul 2009
Location: Nashville, TN
Posts: 5,394
Liked 456 Times on 380 Posts
Likes Given: 143

Default

Is this window suppose to be a "tilt" window? If so, there should be little latches at the top of the window that you push to tilt the window.

,,,and welcome to House Repair Talk.

__________________
oldognewtrick is offline  
 
Reply With Quote Quick reply to this message
Old 06-27-2010, 10:01 AM  
GregC
Quick Belt System
 
Join Date: Jan 2010
Posts: 82
Default

Hi, if it is a SINGLE hung, then the top sash if fixed and cannot be removed. If this is a recent vinyl window, then the bottom sash should either tilt out and down, then lifting one side up will allow you to remove it completely. If it is a older wood window then you have to remove the wood stops around the sash to remove the bottom sash. Hope this helps.

__________________

GregC, President/Founder [COLOR="Blue"]www.Quicktoolbeltsystem.com[/COLOR]

GregC is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Painting Pre-Hung Relia-Bilt Doors jef1 Painting Forum 7 06-22-2013 04:49 PM
Single switch to receptacle jeff7 Electrical and Wiring 11 09-18-2012 08:44 AM
Single Room Circuits Doktor Electrical and Wiring 2 03-10-2010 02:57 PM
Hints on disassembling garden window? poorjohn Windows and Doors 2 04-28-2009 02:27 PM
How flush should pre-hung doors be? TaskBoy Windows and Doors 1 12-14-2008 06:06 AM