DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Windows and Doors > Glazing Compound on Plastic Windows




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 08-03-2012, 09:40 PM  
bubblegummom
Member
 
Join Date: Nov 2008
Location: Seattle
Posts: 31
Likes Given: 1

Default Glazing Compound on Plastic Windows

We've had a couple not-too-big windows missing out of the back of our old garage for quite a while. Last week a couple came in to the fabric store where I work to buy vinyl to repair the damage raccoons had done to their boat, so I thought it might be a good idea to put something in there, just a couple of plastic windows, I think. The frames are wood.

But the Dap glazing compound says not to use it on plastic windows. Do you know why that is?

Thank you!

Loretta



__________________
bubblegummom is offline  
 
Reply With Quote Quick reply to this message
Old 08-03-2012, 11:17 PM  
joecaption
Senior Member
 
Join Date: Jan 2011
Location: Hartfield VA, VA
Posts: 1,361
Liked 38 Times on 33 Posts
Likes Given: 2

Default

Post a picture.
Why not just use glass instead of Plexaglass?



__________________
joecaption is offline  
 
Reply With Quote Quick reply to this message
Old 08-03-2012, 11:23 PM  
bubblegummom
Member
 
Join Date: Nov 2008
Location: Seattle
Posts: 31
Likes Given: 1

Default

incompetent

__________________
bubblegummom is offline  
 
Reply With Quote Quick reply to this message
Old 08-05-2012, 04:21 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 10,260
Liked 848 Times on 757 Posts
Likes Given: 1463

Default

Measure the size of the peices missing and subtract an 1/8 inch go to glass shop and ask the questions. You will be competent in no time.

__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Old 08-06-2012, 07:18 AM  
joecaption
Senior Member
 
Join Date: Jan 2011
Location: Hartfield VA, VA
Posts: 1,361
Liked 38 Times on 33 Posts
Likes Given: 2

Default

Super simple job and you only need one tool, a small container of glazing compound and some window points to do it.
I would first look over the window and see if it's even worth saving. If it's all rotted out then stop and look into a replacement window.

If the reason the panes are missing is someone broke the glass or the old glazing compound fell out then clean up the area where the pane goes, prime the bare wood with an oil based primer, some people use linseed oil instead.
Once it's dry thake a small amount of the glazing compound and roll it between your hands forming a long thin string, take that string and put it around the back side where the glass is going to be sitting.
Once that's done, press the glass in place. Now set the window points in place using the flexable 1" wide puddy knife to set them. (the arrow looking point goes into the wood, just rock the blade back and forth and they will go in.
Now get a bigger blob of glazing and once agin roll it in the palm of your hand forming about a 1/2" string. Press that in place around the window, use the putty knife to compress it in place.
One last step, I dip the putty knife in water and start to smooth the whole thing out. Trim off the extra.
The water helps to keep the glazing from sticking to the knife.

It takes a little practice to get it real pretty the first time, just have fun with it, it's no harder then playing with silly putty.

The reason you prime or use the linseed oil is to protect the wood and to seal it so it does not suck out the oils in the glazing compound.
Glazing compound is sold in the paint dept, the points are sold where they cut window glass most often. Do not buy the ones that look like a triangle.



__________________
joecaption is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Compound mitre saw Blue Jay Tools 6 12-15-2011 09:32 AM
How to use Cold caulk compound Rockwoodbass Plumbing Forum 5 05-15-2011 04:40 PM
Cement Compound. Foundatio Bricks, Masonry and Concrete 10 03-10-2010 02:36 PM
Solid Fir Nine Light, Glazing? Rainsford Windows and Doors 1 11-24-2008 04:47 PM
Joint compound in a box? Leal Flooring 4 06-28-2008 11:32 PM