DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Windows and Doors > Hanging door on tilting wall




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 01-11-2014, 01:44 PM  
bud16415
Fixer Upper
 
bud16415's Avatar
 
Join Date: Feb 2013
Location: Erie Pa, Pa
Posts: 945
Liked 269 Times on 215 Posts
Likes Given: 96

Default

Anytime I ever started prying and removing something like a stud like this I normally mess up the finished drywall in the process. His parallelogram doesn't need to become a rectangle he only needed to pick up 1/4 on each side on opposite corners. That's why I suggested trimming just that bit. Sometimes a stud will pop right out my luck is someone put a bunch of screws in from the back side. I think both methods will work. Not keen on the sledge hammer idea.



__________________
bud16415 is offline  
 
Reply With Quote Quick reply to this message
Old 01-11-2014, 02:09 PM  
CallMeVilla
Senior Member
 
CallMeVilla's Avatar
 
Join Date: Feb 2010
Location: San Diego
Posts: 1,179
Liked 335 Times on 264 Posts
Likes Given: 127

Default

Projects are learning opportunities. If you want a door to behave, the jamb must be "plumb" (meaning perfectly vertical). Since the floor is "level" (side to side) you don't have to worry about it.

Temporarily removing the jack stud on the hinge side is no big deal. The header above the door can carry the load while you realign and/or shim the new jack stud to make it plumb.

Honestly, the drywall issue is minimal. If you don't know how to do it, here is your opportunity to learn how. As for the casing ... you might have to rip it down. Take what you can get and do your best!

door.jpg  
__________________
CallMeVilla is offline  
nealtw Likes This 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
hanging full length mirror on wall -Dman100- General Home Improvement Discussion 11 01-01-2012 02:18 PM
Qwest Box Hanging off of the wall ME87 General Home Improvement Discussion 4 11-08-2011 07:58 PM
Removing wall for new door beast696 Walls and Ceilings 8 11-08-2010 10:23 PM
Garage Foundation "Tilting?" Shane N Bricks, Masonry and Concrete 4 10-10-2008 12:22 PM
Tilting garage rizay Framing and Foundation 8 07-16-2006 03:13 PM