DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Windows and Doors > Help!! damaged door jamb





Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 07-26-2007, 11:35 PM  
GBjay
Junior Member
 
Join Date: Jul 2007
Posts: 5
Default Help!! damaged door jamb

Hi,

We're repairing our fraternity house (very old) and I'm stuck with problems in my room. The problem is with the bedroom door. It won't hang on the frame. After a few minutes, we all realized that the side plank of the frame is so damaged (assuming from someone else screwing in and out the door repeatedly) that the hinges will not stay put.

Is there any inexpensive way for me to take care of this? Is there any way I can replace that side so I can hang my door again?

Thanks.

I'm Jay, by the way. I'll be on HR a lot since we have a lot of things to repair.



__________________
GBjay is offline  
 
Reply With Quote Quick reply to this message
Old 07-27-2007, 03:43 PM  
Square Eye
Senior Member
 
Square Eye's Avatar
 
Join Date: Jan 2006
Posts: 1,273
Liked 4 Times on 4 Posts

Default

Have you tried using longer screws?
It may take a 3" screw to reach the wall framing, but it would be a good quick fix.



__________________

[URL="http://www.houserepairtalk.com/announcement.php?f=39&a=6"][size=3]The Ten Commandments of House Repair Talk[/size][/URL]



[URL="http://home.bellsouth.net/p/s/community.dll?ep=16&groupid=289528&ck="]Square Eye's home page[/URL]

Square Eye is offline  
 
Reply With Quote Quick reply to this message
Old 08-06-2007, 09:06 PM  
Tru_blue
Junior Member
 
Tru_blue's Avatar
 
Join Date: Dec 2006
Posts: 7
Default Rehanging

I'd also use longer screws as my first choice. By using 3" screws as previously mentioned, the screws would anchor into the studs behind the door frame.

It's interesting - usually it's the doorknob side of the door frame that is damaged, not the hinge side.

Another possibility is to relocate the hinges higher or lower in an undamaged area. If two hinges were used, you could also go to three hinges. Good luck.

__________________
Tru_blue is offline  
 
Reply With Quote Quick reply to this message
Old 08-09-2007, 01:31 PM  
billbeee
Junior Member
 
Join Date: Jul 2007
Posts: 8
Liked 1 Times on 1 Posts

Default

Jay,
If you have not already fixed your problem with longer screws.

I fixed one a short while ago using small plastic wall plugs in the old screw holes. I used the white ones in the photo, and didn't even have to drill the old holes wider.


Cheers
Bill



__________________

Cheers
Bill
[url]http://www.builderbill-diy-help.com[/url]

billbeee is offline  
 
Reply With Quote Quick reply to this message
Old 08-12-2007, 12:13 AM  
GBjay
Junior Member
 
Join Date: Jul 2007
Posts: 5
Default

Thanks, guys...

I went to homedepot, got 2 inch nails.... it passed the frame and held pretty well (it's holding a door from 1920, REALLY HEAVY). then i got 10-15 smaller nails to nail the door together (it was breaking apart due to wear i guess). Either way, after I paint it tomorrow, i would imagine the door would like spanking new and clean....

Just feels good to have a nice cool room with a door now haha.

thanks.



__________________
GBjay is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
advice on repairing damaged duct insulation txthang21 HVAC 3 11-16-2008 07:42 AM
Water damaged flooring Sunnygal Flooring 3 08-04-2008 01:04 PM
Quarry tile damaged rlc2052 Flooring 2 12-19-2007 04:53 PM
Repair of damaged external sheathing Shark Flooring 0 08-04-2007 03:14 PM
More Water Damaged Framing with Pictures JKTrevecca Framing and Foundation 7 02-13-2007 09:41 PM