DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Windows and Doors > help! non-standard sized doors too small for non-standard sized doorframes...





Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 03-28-2008, 12:47 PM  
buddyreid
Junior Member
 
Join Date: Mar 2008
Posts: 3
Default help! non-standard sized doors too small for non-standard sized doorframes...

1st time poster-- hello everyone...

i recently bought an old house (1922) that had been frankensteined for decades, apparently. everything was paneled... not only the walls, but the doors, the baseboards, the doorframes-- INSIDE the doorframes. i am serious, it was absolutely ridiculous.

anyway-- after removing all the paneling, turns out the doors no longer fit the doorframes. in fact, the doors are 81 inches tall, the doorframes are 83+ inches high. most doors at lowe's are 80 inches tall. the doors also are an inch more narrow than the doorframes.

i thought about "shrinking" the doorframes to fit the doors, but that would mean i would need an 8 inch "jamb" (?) to cover it, which would not look right.

i would appreciate any suggestions... i'm stumped on this one.

thanks in advance!



__________________
buddyreid is offline  
 
Reply With Quote Quick reply to this message
Old 03-28-2008, 12:52 PM  
cibula11
Senior Member
 
Join Date: Dec 2006
Posts: 331
Default

So the openings of the doors are 83" tall by 1-2" smaller than door?
83" isn't that bad. Just use some blocking with shims and your casing should cover any gap. The width should be the same. This would obviously be the case if you were buying new doors. Would you rather use the existing ones?
Pics would be helpful if you could.

You might also think about building the jambs out all around, removing the door stop strip and attaching later until the difference is made up. The only issue with this is that you would probably see the old jambs when the casing goes up. I suppose some drywall compound could cover this.



__________________

Last edited by cibula11; 03-28-2008 at 12:55 PM.
cibula11 is offline  
 
Reply With Quote Quick reply to this message
Old 03-28-2008, 01:15 PM  
guyod
Senior Member
 
Join Date: Jan 2008
Location: Wind Gap, PA
Posts: 423
Liked 20 Times on 19 Posts
Likes Given: 8

Default

Some times its easier just to start from scratch and install prehung doors.

__________________
guyod is offline  
 
Reply With Quote Quick reply to this message
Old 03-28-2008, 03:55 PM  
Square Eye
Senior Member
 
Square Eye's Avatar
 
Join Date: Jan 2006
Posts: 1,273
Liked 4 Times on 4 Posts

Default

You could possibly add material to the door. Add an inch and a half to the bottom, an inch to the hinge side...
Maybe split the difference and add 1/2" strips down both sides and get a 2 3/4" latch for your door handles.
No really good way to solve this one. You're going to see the fix whatever you do

__________________

[URL="http://www.houserepairtalk.com/announcement.php?f=39&a=6"][size=3]The Ten Commandments of House Repair Talk[/size][/URL]



[URL="http://home.bellsouth.net/p/s/community.dll?ep=16&groupid=289528&ck="]Square Eye's home page[/URL]

Square Eye is offline  
 
Reply With Quote Quick reply to this message
Old 03-29-2008, 10:53 AM  
buddyreid
Junior Member
 
Join Date: Mar 2008
Posts: 3
Default

thanks guys... i figured it's one of those things that will have a "visible fix"... but most of the house is going to be like that. i used 600lbs of joint compound to fix the walls... the fix is visible, but i like the look. one of the "pleasures" of having an old house, i guess.



__________________
buddyreid is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
patio doors and security John7447 General Home Improvement Discussion 1 06-06-2008 05:38 PM