DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Windows and Doors > Removing Caulk Applied in 1923?




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 10-30-2013, 08:45 PM  
Rumi
I think I can...
 
Join Date: Nov 2011
Location: , N.E. Ohio
Posts: 49
Liked 2 Times on 2 Posts
Likes Given: 2

Default Removing Caulk Applied in 1923?

My basement windows are made with a steel frame that tips in and up. They have three panels each. I need to replace a broken pane in one.

What would be the best approach to remove this ancient, dried out, hardened indoor caulk? Do I try to chip it out, try heating it up, grind it out?

Thanks guys, Rumi.



__________________
Rumi is offline  
 
Reply With Quote Quick reply to this message
Old 10-30-2013, 09:57 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 10,277
Liked 850 Times on 759 Posts
Likes Given: 1466

Default

What you likely have is window putty and wood frames. This a little tricky if you have never seen it one.
Google : removing old window putty, and watch a few videos and read some of the info there.



__________________
nealtw is offline  
Rumi Likes This 
Reply With Quote Quick reply to this message
Old 10-30-2013, 10:01 PM  
CallMeVilla
Contractor
 
CallMeVilla's Avatar
 
Join Date: Feb 2010
Location: San Diego
Posts: 1,276
Liked 394 Times on 307 Posts
Likes Given: 161

Default

Re-did an old house with funky windows ... two stories plus a half-buried basement.

Start with a Putty Chaser. It allows you to use a drill and a bit to carve the bulk of the putty out of the window. Wear a mask.

http://www.dkhardware.com/product-64...FQmCQgoduDMACg

Easy Off Oven Cleaner does soften the remainder making it easier to scrape out ... OR, get a heat gun, a stiff scraper, and a firm wire brush. Be persistent, patient, and determined. It will be worth it when you are done.

The

__________________
CallMeVilla is offline  
2
People Like This 
Reply With Quote Quick reply to this message
Old 11-03-2013, 02:33 PM  
Rumi
I think I can...
 
Join Date: Nov 2011
Location: , N.E. Ohio
Posts: 49
Liked 2 Times on 2 Posts
Likes Given: 2

Default

Neal, the frames are definitely metal, which will be better than worrying about tearing up wood like you mentioned.

Thanks for your ideas guys, I have a heat gun, and I'll look into the Putty Chaser as well.

__________________
Rumi is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Caulk removal? Rodney R General Home Improvement Discussion 4 06-24-2012 09:21 AM
bathtub caulk Christian Plumbing Forum 18 04-16-2011 01:17 PM
Removing silicone caulk Almart Plumbing Forum 4 03-19-2009 01:56 PM
caulk or mortar? ChipsXJ Carpentry and Woodworking 1 03-16-2009 07:02 PM
Can Dry-Lok be applied on a wood surface? jmichaelquin Flooring 2 04-03-2007 07:44 PM