DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Windows and Doors > Replacing Prehung Front Entry Door in Stucco




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 06-14-2013, 01:59 PM  
nealtw
Senior Member
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 8,786
Liked 647 Times on 580 Posts
Likes Given: 1156

Default

If you move the frame out to the stucco, you may not find anything for the sucurity screw for the hinges and stricker plate. As the door is inset it will never swing all the open anyway so I would install it flush with inside. The filler strip between the frame and the stucco may have to be custom cut, but this not really not a big deal.
http://zenseeker.net/Randomness/HomeSecurity.htm



__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Old 06-17-2013, 10:52 AM  
o2284200
Member
 
Join Date: Oct 2012
Location: , South Florida
Posts: 92
Liked 4 Times on 3 Posts

Default

THANKS!
Nice link!

Any thoughts on trying to save the existing exterior molding, which sits between the jamb & the stucco by separating the jamb from the molding? Thus not disturbing the stucco at all.



__________________
o2284200 is offline  
 
Reply With Quote Quick reply to this message
Old 06-17-2013, 11:46 AM  
nealtw
Senior Member
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 8,786
Liked 647 Times on 580 Posts
Likes Given: 1156

Default

Find the nails and drive them right thru the molding

punch.jpg  
__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Old 06-17-2013, 11:56 AM  
WindowsonWashington
Junior Member
 
WindowsonWashington's Avatar
 
Join Date: May 2013
Location: Washington, DC, Virginia
Posts: 198
Liked 19 Times on 18 Posts
Likes Given: 28

Default

That or cut them from the backside.

Be sure to cut the stucco loose from the door frame as mentioned before.

__________________
WindowsonWashington is offline  
 
Reply With Quote Quick reply to this message
Old 06-17-2013, 12:56 PM  
nealtw
Senior Member
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 8,786
Liked 647 Times on 580 Posts
Likes Given: 1156

Default

Quote:
Originally Posted by WindowsonWashington View Post
That or cut them from the backside.

Be sure to cut the stucco loose from the door frame as mentioned before.
That's what he wants to avoid, the trim will be nailed to the framing and covered with stucco, if he uses a sawsall he will damage the trim he wants to keep.
__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Old 06-18-2013, 05:59 AM  
WindowsonWashington
Junior Member
 
WindowsonWashington's Avatar
 
Join Date: May 2013
Location: Washington, DC, Virginia
Posts: 198
Liked 19 Times on 18 Posts
Likes Given: 28

Default

That is why I recommended cutting the stucco from the frame first with an angle grinder and masonry blade.

At that point, the door can vibrate all it wants and it won't disturb the stucco.

__________________
WindowsonWashington is offline  
 
Reply With Quote Quick reply to this message
Old 07-03-2013, 12:03 PM  
o2284200
Member
 
Join Date: Oct 2012
Location: , South Florida
Posts: 92
Liked 4 Times on 3 Posts

Default

Thanks!
How do I cut the stucco from the frame first with an angle grinder and masonry blade as you are recommending and not disturb the stucco?

And what size & type of angle grinder are you recommending?

__________________
o2284200 is offline  
 
Reply With Quote Quick reply to this message
Old 07-07-2013, 07:11 AM  
WindowsonWashington
Junior Member
 
WindowsonWashington's Avatar
 
Join Date: May 2013
Location: Washington, DC, Virginia
Posts: 198
Liked 19 Times on 18 Posts
Likes Given: 28

Default

Small angle grinder with a masonry blade.

Cut a small kirf cut between the old frame and the stucco.

Plan on making a bunch of dust.

__________________
WindowsonWashington is offline  
 
Reply With Quote Quick reply to this message
Old 07-12-2013, 11:56 AM  
o2284200
Member
 
Join Date: Oct 2012
Location: , South Florida
Posts: 92
Liked 4 Times on 3 Posts

Default

Thanks!
I had another installer come by and he says "the way his company would install it, (move the frame out to the stucco) the problem is that the stucco guy put too much stucco on each side, which basically buried the entire brick molding."

However, if I had told him not to stucco around the door or he had put on less stucco like he did on the top, I'd be in better shape. Now, he says I need to "chip out about an inch of stucco on each side.". Another lesson learned...Hopefully not too costly a one.

Anyone have any thoughts?





__________________
o2284200 is offline  
 
Reply With Quote Quick reply to this message
Old 07-12-2013, 06:09 PM  
nealtw
Senior Member
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 8,786
Liked 647 Times on 580 Posts
Likes Given: 1156

Default

If you move the frame out to the stucco you will not have anything to screw the Security screws into
You can leave the brick mold there. Just remove all the nails holding the frame in place, don't do anything with the brick mold and with the door still in place and the frame loose, give the door a few wacks with a heavy hammer from the outside and the frame will pull away from the brick mold. The brick mold is never glued to the frame and the two ussually seperate reasonably easy.



__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Removing front window from front door... is it possible? PatDoody Windows and Doors 6 05-03-2011 07:27 PM
Leaking underneath the Front entry Door sbaronia Windows and Doors 3 03-23-2010 02:42 PM
replacing a front door (& jamb?) Wuzzat? Windows and Doors 12 02-10-2010 01:05 PM
entry door sk8er72 Windows and Doors 1 10-05-2008 10:21 PM
Need a 2-4 Entry Door dekohl Windows and Doors 3 04-08-2008 08:17 AM