DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Windows and Doors > Security Door Dead Bolt is Misaligned with Hole




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 02-28-2014, 06:49 PM  
Paul678
Junior Member
 
Join Date: Nov 2013
Posts: 22
Liked 1 Times on 1 Posts

Default Security Door Dead Bolt is Misaligned with Hole

You can see here:



The dead bolt is too low and a bit too forward for the receiving hole. The bottom bolt's hole is too low as well, but it still makes it.

Here are the holes:



And the bolts:



Although the bottom hinge appears to be a bit loose, it doesn't seem to be the cause of this problem. That would be the fault of the upper hinge, but it seems to be working well. The alignment of the door to the frame is good, and is not mis-aligned.

Most advice on the internet says to just Dremel grind the hole lower and larger, but I'm hesitating because it's not just a strike plate, but a whole door frame than I would be modifying.

Is grinding or filing the hole larger the only way?



__________________
Paul678 is offline  
 
Reply With Quote Quick reply to this message
Old 02-28-2014, 06:58 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 9,462
Liked 748 Times on 668 Posts
Likes Given: 1306

Default

I think that would be grinding it too. If the door sits right in the frame now.



__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Old 02-28-2014, 08:37 PM  
kok328
Supporting Member
HRT_SUPPORTER.png
 
Join Date: Nov 2007
Location: Grand Blanc, MI
Posts: 2,173
Liked 102 Times on 89 Posts
Likes Given: 61

Default

It looks like the problem is your door is bent/bowed. The deadbolt bows inward. Looks like someone pushed against the door really hard.

__________________
kok328 is offline  
 
Reply With Quote Quick reply to this message
Old 03-01-2014, 02:49 AM  
Paul678
Junior Member
 
Join Date: Nov 2013
Posts: 22
Liked 1 Times on 1 Posts

Default

Quote:
Originally Posted by kok328 View Post
It looks like the problem is your door is bent/bowed. The deadbolt bows inward. Looks like someone pushed against the door really hard.
Hello again, Kok328.

Maybe what you are seeing is the distortion from the wide
angle of the lens? (pin cushion effect of the lens)

At any rate, do you think my only solution is to grind the
hole larger? Again, the door appears to fit the frame
ok.
__________________
Paul678 is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Dead bolt question cut_un General Home Improvement Discussion 1 07-12-2013 05:56 PM
Front door jamb security- problem jdavidse Windows and Doors 6 01-08-2013 12:37 PM
security door knob darklide Windows and Doors 0 07-14-2010 03:24 PM
the big dead tree next door (kinda long) Philphine General Home Improvement Discussion 11 06-30-2010 01:18 PM