DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Windows and Doors > Windows Painted shut!





Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 10-23-2009, 08:04 AM  
Staci_25
Member
 
Join Date: Oct 2009
Posts: 36
Default Windows Painted shut!

The windows in the apt i'm bringing up to date/restoring has had ALL the windows painted shut! Whats the best/easiest way to open them without having to replace the original windows?
Thanks so much!



__________________
Staci_25 is offline  
 
Reply With Quote Quick reply to this message
Old 10-23-2009, 08:59 AM  
CraigFL
Senior Member
 
Join Date: Mar 2006
Posts: 409
Default

I always get the thin putty knife out and lightly tap with a hammer to break the seal. Carefully!!



__________________
CraigFL is offline  
 
Reply With Quote Quick reply to this message
Old 10-23-2009, 09:02 AM  
Staci_25
Member
 
Join Date: Oct 2009
Posts: 36
Default

I'll def. give that a try! Keep your fingers crossed that there's onlu a coat or two of paint and not 4 or 5 like everything else!

__________________
Staci_25 is offline  
 
Reply With Quote Quick reply to this message
Old 10-23-2009, 09:46 AM  
TxBuilder
 
TxBuilder's Avatar
 
Join Date: Feb 2005
Posts: 1,676
Liked 4 Times on 4 Posts
Likes Given: 4

Default

I would use a box cutter. Craig is right though be careful.

__________________
TxBuilder is offline  
 
Reply With Quote Quick reply to this message
Old 10-23-2009, 08:58 PM  
Nestor_Kelebay
Emperor Penguin
 
Nestor_Kelebay's Avatar
 
Join Date: Mar 2009
Location: Winnipeg, Manitoba
Posts: 1,844
Liked 2 Times on 2 Posts

Default

What I would do is go to any sheet metal shop and get some pieces of sheet metal. Use children's adhesive putty (which can easily be removed), or very small pieces of double sided mounting tape (which you can buy at any hardware store) to mount pieces of sheet metal over the glass in the area you're working. Now, use your hair dryer set on HI to heat the paint in a corner and slide a putty knife between the two wooden parts that are painted together. As the area warms up, the paint will soften and you'll be better able to slide a putty knife in and separate the window from the frame.

Metal is a good conductor of heat, so it'll allow the heat to dissipate laterally along the sheet metal, and that will prevent you're cracking the glass if one part of the glass is wanting to expand and the rest doesn't.

Also, inspect the joint between the window and frame very closely. Latex paints in North America are made predominantly from one of two different kinds of plastic; polyvinyl acetate and polymethyl methacrylate. (So far as I know, no paints use binders that are a mixture of the two different kinds of plastic, but I suppose it's possible to do that, although I don't see any real need for doing that.)

You probably know polyvinyl acetate better as "white wood glue", and polymethyl methacrylate better as Plexiglas or Lucite or Perspex (if made by Rohm & Haas, Dupont or ICI, respectively). Polyvinyl acetate is predominantly used to make PVA or "general purpose" latex primers and budget priced interior and exterior latex paints. Polymethyl methacrylate is used to make better quality interior and exterior latex paints and specialty primers like concrete primers that are intended to be applied over fresh concrete, which is highly alkaline.

ONE of the many problems with Polyvinyl Acetate paints is that adhesion is simply a difficult property to engineer out of the PVA molecule (which is why it makes a good glue). Even when fully dried, PVA retains a slight tackiness, whether it's fully dried PVA glue or fully dried PVA paint. What I'm saying is that it may be that the windows aren't actually painted together at all, but that the paint on the window is simply sticking to the paint on the frame (and that happens all the time with people who use inexpensive paints to paint windows and doors and such).

(When I was in university, I often read laying in my bed in the residence I was staying at. When I would rest my head against the wall, I found that my hair would always end up sticking to the paint on the wall. That was a mystery to me until I bought an apartment block and started learning more about paint. I soon found out that the reason my hair was sticking to the paint was because the moisture from my scalp was softening the PVA paint on the walls, and that combined with the paint's being naturally sticky, even when dry, is what was causing my hair to stick.)

So, take a bright light and have a real good look at the light reflection off the joint between window and frame and see if it looks like a single continuous coat of paint between the two, or separate coats of paint on each. If it's a single coat of paint, they're painted together, and I'd try heating the paint to soften it. However, if it more looks like the two coats of paint are sticking to each other, then I'd try using an artist's paint brush to paint water onto the joint you want to separate. That's cuz yet another problem with PVA paints is that they soften up and loose their adhesion to the substrate under wet, damp or even under humid conditions, (which, incidentally, is why so many people have paint problems in bathrooms, and keep getting told that the problem was insufficient paint preparation like cleaning and sanding down the old paint and such. It wasn't, the problem was that an inexpensive PVA latex paint is not going to perform well in a humid environment like a bathroom.)

So, if you suspect it could just be a case of paint sticking to paint, then getting the joint between them wet and allowing the paint to absorb moisture is gonna soften the paint, making it easier to separate the joint.

Here, if you want to know more about latex paints in a few hours than most people working in paint stores, go here:
Continuing Education Requirements for painting tips and advice - Paint Quality Institute
and download and read the two PDF files entitled:
"The Ingredients of Paint and Their Impact on Paint Properties"
and
"How Color Is Affected by the Ingredients of Paint".

Post again if you have any questions about anything in these two PDF files.

__________________

Last edited by Nestor_Kelebay; 10-23-2009 at 09:28 PM.
Nestor_Kelebay is offline  
 
Reply With Quote Quick reply to this message
Old 10-23-2009, 09:10 PM  
Staci_25
Member
 
Join Date: Oct 2009
Posts: 36
Default

*sigh* I'm so glad I took some time off from graduate school while I redo this apartment.... I feel sure I would be overwhelmed if I were doing both remodeling and 9 hours of class along with 10 hours of clinicals!!! hahaha! Thanks for all the help!



__________________
Staci_25 is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Sanding/Refinishing Painted Wood Floors abiso Flooring 1 08-17-2009 08:50 PM
painted wall oven door chirp General Appliance Discussion 4 06-25-2009 11:41 AM
Painted wood paneling daph0216 Decorating and Design 2 05-29-2007 05:53 AM
How do you remove wall paper after it's been painted over? MawMaw Di General Home Improvement Discussion 3 05-03-2007 09:30 AM
priming already painted wood Will1987 Decorating and Design 5 02-25-2007 12:11 PM