DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Insulation and Radiant Barriers > "Finished" basement insulation




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 12-04-2011, 12:27 PM  
laharned
Junior Member
 
Join Date: Dec 2011
Posts: 1
Default "Finished" basement insulation

We have a 1959 house in MN with a 1960-1970s finished walk out basement complete with cheap faux wood paneling and asbestos floor. This has become our children's play area this fall, but we now need to consider insulating the walls. They have some framing to hold the paneling (obviously) but I do no know the best way to insulate the walls. We have no means of upgrading the paneling and it does not bother me right now with small kids playing down there so this will be put back down on what ever is put in place. Also, we have a drop tile ceiling and I am not sure if there is a good way to get insulation up to the wall that extends into the ceiling area.




Questions
Do I have someone come and blow in insulation (not a DIY) or do we put up some kind of roll insulation?
If we do a DYI, what prep would we need and what else would we have to do in addition to putting insulation between the framing?


Most of the exterior facing walls have a radiator running under the bottom edge of the paneling so I am not sure if there is a closure inside the wall at the base of the paneling before the radiators (I believe not).

We have an occasional leak in one corner when the extension to the gutter spout is not put back on (after mowing) or falls off and we have a heavy rain so this is another concern if we putt something in the wall.



__________________
laharned is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
"Bulkhead" Basement Door dpg1961 Windows and Doors 6 09-07-2012 10:30 AM
System running Hot while set to "Cool" & "Off" halogen49 HVAC 7 03-06-2011 04:42 PM
How to "push pull or tow" insulation into this space? CoconutPete Insulation and Radiant Barriers 4 11-22-2010 08:49 AM
Basement Finishing "System" slownsteady Insulation and Radiant Barriers 4 09-13-2009 06:41 PM
Adding trim to basement "ledge"... arborpark Carpentry and Woodworking 5 05-01-2009 04:20 PM