DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Insulation and Radiant Barriers > insulating inside kitchen cabinets




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 11-13-2013, 08:22 AM  
notjustash
Junior Member
 
Join Date: Nov 2013
Posts: 2
Default insulating inside kitchen cabinets

hello,
i am a renter of an OLD house. our kitchen has the built-in cabinets that go right up to the ceiling with the little turn knob locks. when you stand in front of the cabinets you can feel cold air radiating from underneath and the interior of the cabinets is COLD. I'm obviously losing a lot of heat through this corner of the house. you can see little holes of daylight under the kitchen sink.

i was thinking of getting the rigid foam insulation boards to line the back of the cabinets and put strips under the front bottom where the toe-kick is.

my questions... is this type of insulation safe to use inside the cabinets near my food? i can't see why it wouldn't be but don't know for sure. also, how can i cover it to make it not look like insulation in the cabinets? i was thinking of just getting contact paper. would this work? i don't want to do it and then find out the glue breaks down the foam or something. it doesn't need to be beautiful as it is inside the cabinets. i want to do this as cheap as possible.

thanks!



__________________
notjustash is offline  
 
Reply With Quote Quick reply to this message
Old 11-13-2013, 06:32 PM  
nealtw
Senior Member
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 8,815
Liked 659 Times on 590 Posts
Likes Given: 1168

Default

It would want to be covered with drywall fire safety, then you could just add a corner round to hold it all in.



__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Old 11-16-2013, 05:38 PM  
notjustash
Junior Member
 
Join Date: Nov 2013
Posts: 2
Default

ok, thank you!

__________________
notjustash is offline  
 
Reply With Quote Quick reply to this message
Old 11-17-2013, 08:01 AM  
Drywallinfo
Senior Member
 
Join Date: May 2013
Posts: 140
Liked 27 Times on 22 Posts
Likes Given: 7

Default

Drywall over the insulation would do it. And it would be fairly easy since no taping would be needed. You would, however, want to put an edge bead over each edge to give you a clean edge up against your cabinet - and that, along with any screws used, would have to be skimmed over with a few coats. A vinyl edge bead that could be slipped over each edge might be best - see http://www.hardwareonlinestore.com/images/stories/virtuemart/product/311645.jpg . Otherwise, you will either have a rough drywall edge or use a bead of caulk.

__________________

- Taping & Finishing Drywall Joints
- Inside & Outside Corner Drywall Joints
- How to Repair Small and Big Holes
- How to Build and Finish Drywall Arches
- How to Apply or Repair Texture
Free Tutorials at http://www.drywallinfo.com


Last edited by Drywallinfo; 11-17-2013 at 09:18 AM.
Drywallinfo is offline  
nealtw Likes This 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Kitchen wall cabinets without base cabinets?? Christian General Home Improvement Discussion 7 03-15-2010 03:39 PM
Insulating inside walls for noise house92 Insulation and Radiant Barriers 2 10-11-2009 06:52 PM