DIY Home Improvement, Remodeling & Repair Forum

DIY Home Improvement, Remodeling & Repair Forum (http://www.houserepairtalk.com/forum.php)
-   Painting Forum (http://www.houserepairtalk.com/f107/)
-   -   509 Wagner Professional Airless paint sprayer (http://www.houserepairtalk.com/f107/509-wagner-professional-airless-paint-sprayer-13697/)

davvid20120 03-31-2012 01:40 PM

509 Wagner Professional Airless paint sprayer
 
Hi,

I bought a used 509 Wagner Professional Airless paint sprayer at a auction. The previous owner used in a cabinet shop. Besides the motor, I am taking the unit apart to service, basically get rid of all the dried paint, remove rust, clean the springs, etc.

The previous owner did not take care of. My questions are:

How do I clean? What is best solvent/cleaner to use? The paint that is dried in there is hard and chalky. I have some parts sitting in mineral spirits, this is not dissolving the paint. So is it latex? If so, how do you remove latex paint?

What is best tool to use to clean the parts? The parts that are in the gun, the housing on the front of the pump apart. (where the gun connects to and hose that goes in paint). I have used a battery terminal cleaner to get in the male parts threaded part and that works great. Any suggestions?

Does anybody know how to get a onwer manual, wagner's website wants a model #, and the only model number is on pump housing for the pump not actual sprayer.

CalRehabber 04-10-2012 01:57 PM

I've been wondering about this too since I just picked up a nice used sprayer..

I'm thinking that brush cleaner would be good to run through it and clean it.. that stuff does wonders with my paint brushes...

nealtw 04-10-2012 03:15 PM

http://answers.wagnerspraytech.com/answers/1512-en_us/category/361939/sprayers-questions-answers/questions.htm?page=2&sort=helpfula

Workaholic 04-21-2012 02:23 PM

Is their dried paint all the way through it? Such as the manifold, gun, hose ect? Lacquer will break the latex but can be hard on rubber packings and I am not familiar with that airless unit. I would replace the hose and possibly the gun if it has dried paint through it. A repack of the packings will also be a wise move.

davvid20120 05-22-2012 09:28 AM

yes dried all the way through. I used CLR, it soften the paint up and use a bunch of different tools to clean out.


All times are GMT -6. The time now is 02:19 PM.