DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Painting Forum > 509 Wagner Professional Airless paint sprayer




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 03-31-2012, 01:40 PM  
davvid20120
Junior Member
 
Join Date: Mar 2012
Posts: 7
Default 509 Wagner Professional Airless paint sprayer

Hi,

I bought a used 509 Wagner Professional Airless paint sprayer at a auction. The previous owner used in a cabinet shop. Besides the motor, I am taking the unit apart to service, basically get rid of all the dried paint, remove rust, clean the springs, etc.

The previous owner did not take care of. My questions are:

How do I clean? What is best solvent/cleaner to use? The paint that is dried in there is hard and chalky. I have some parts sitting in mineral spirits, this is not dissolving the paint. So is it latex? If so, how do you remove latex paint?

What is best tool to use to clean the parts? The parts that are in the gun, the housing on the front of the pump apart. (where the gun connects to and hose that goes in paint). I have used a battery terminal cleaner to get in the male parts threaded part and that works great. Any suggestions?

Does anybody know how to get a onwer manual, wagner's website wants a model #, and the only model number is on pump housing for the pump not actual sprayer.



__________________
davvid20120 is offline  
 
Reply With Quote Quick reply to this message
Old 04-10-2012, 01:57 PM  
CalRehabber
Invester / Rehabber
 
Join Date: Dec 2011
Location: Redwood City, CA
Posts: 14
Default

I've been wondering about this too since I just picked up a nice used sprayer..

I'm thinking that brush cleaner would be good to run through it and clean it.. that stuff does wonders with my paint brushes...



__________________
CalRehabber is offline  
 
Reply With Quote Quick reply to this message
Old 04-10-2012, 03:15 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 9,337
Liked 732 Times on 653 Posts
Likes Given: 1281

Default

http://answers.wagnerspraytech.com/answers/1512-en_us/category/361939/sprayers-questions-answers/questions.htm?page=2&sort=helpfula
__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Old 04-21-2012, 02:23 PM  
Workaholic
Lifetime Supporting Member
HRT_LIFETIMESUPPORTER.png
 
Join Date: Apr 2012
Posts: 26
Liked 3 Times on 2 Posts
Likes Given: 4

Default

Is their dried paint all the way through it? Such as the manifold, gun, hose ect? Lacquer will break the latex but can be hard on rubber packings and I am not familiar with that airless unit. I would replace the hose and possibly the gun if it has dried paint through it. A repack of the packings will also be a wise move.

__________________
Workaholic is offline  
 
Reply With Quote Quick reply to this message
Old 05-22-2012, 09:28 AM  
davvid20120
Junior Member
 
Join Date: Mar 2012
Posts: 7
Default

yes dried all the way through. I used CLR, it soften the paint up and use a bunch of different tools to clean out.



__________________
davvid20120 is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
paint sprayer learning Tools 3 09-07-2010 08:20 PM
Tried to fix Kitchen Sprayer dmrob General Home Improvement Discussion 3 01-30-2007 09:30 PM
Sprayer for Sink CraigFL General Home Improvement Discussion 1 12-01-2006 12:53 PM
Painting outside of house with sprayer jdc50 Decorating and Design 5 09-05-2006 12:51 PM