DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Painting Forum > Backbrushing A Metal Door




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 08-08-2012, 02:14 AM  
billhead1
Member
 
Join Date: Apr 2012
Location: Baton Rouge, Louisiana
Posts: 32
Liked 1 Times on 1 Posts
Likes Given: 4

Default Backbrushing A Metal Door

I plan to use a 4" foam roller and back brush my steel back door for coating uniformity. The door has a small amount of rust at the bottom, which I was planning to sand with 150 grit paper, prime with red oxide primer, then apply 2 coats of latex paint. I was planning to use a 3.5 or 4-inch synthetic, soft bristled polyester brush to minimize brush marks.


Any suggestions about the surface prep, type of bristle or width of brush?



__________________
billhead1 is offline  
 
Reply With Quote Quick reply to this message
Old 08-08-2012, 07:55 AM  
kok328
Supporting Member
HRT_SUPPORTER.png
 
Join Date: Nov 2007
Location: Grand Blanc, MI
Posts: 2,173
Liked 102 Times on 89 Posts
Likes Given: 61

Default

I've never had any luck creating a powder coat like finish without using spray can paint.

__________________
kok328 is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Question about painting metal door LISAinTN Painting Forum 7 03-10-2012 01:16 AM
need tips on painting a metal garage door vabeachtime General Home Improvement Discussion 17 01-13-2012 08:17 AM
Metal Door Frame with pre-welded hinges help NotSoHandy52 Windows and Doors 4 12-20-2011 05:25 PM
Exterior metal door/jam does not seal all the way around. wannabepba Windows and Doors 1 01-10-2010 04:08 PM
Metal door NoJesus4u Windows and Doors 0 03-09-2009 01:02 PM