DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Painting Forum > Garage Door

LinkBack Thread Tools Search this Thread Display Modes
Old 03-26-2012, 08:16 AM  
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 10,277
Liked 850 Times on 759 Posts
Likes Given: 1466


There should be dry time on the can, anything shorter and you could cause a sticking problem.

nealtw is offline  
Reply With Quote Quick reply to this message
Old 03-26-2012, 06:44 PM  
Hammer Wielder
Join Date: Feb 2012
Posts: 2

I would also use two very thin coats in the crack area to make sure they dry completely...To tell you the truth unless you are changing the color of the door, the paint in there should still look good. Its not usually subjected to the same weathering and sun fade as the exterior of the panels and may be in good shape still.


Rimo007 is offline  
Reply With Quote Quick reply to this message
Old 04-21-2012, 02:51 PM  
Lifetime Supporting Member
Join Date: Apr 2012
Posts: 26
Liked 3 Times on 2 Posts
Likes Given: 4


I paint garage doors all the time with a quality exterior paint. Clean, scuff and paint, as you raise the door you will get into the cracks and the edge sealed area.

Workaholic is offline  
Reply With Quote Quick reply to this message

Quick Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Garage Door Radioman Windows and Doors 6 10-30-2012 03:44 PM
Garage Door StevePeel Bricks, Masonry and Concrete 4 05-03-2011 05:40 PM
Garage Door gap Jinglebob Windows and Doors 4 12-21-2009 06:13 PM
Garage door nrsmd Windows and Doors 3 04-04-2009 09:46 AM
Garage Door Opener Ripped From Door jimparson General Home Improvement Discussion 2 11-23-2008 12:18 PM