DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Painting Forum > Metal Paint




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 03-17-2011, 11:05 PM  
jnnewton
Junior Member
 
Join Date: Mar 2011
Location: kansas city, kas
Posts: 2
Default Metal Paint

I got some Appliance paint from Ace to paint some newly made metal parts, and apparently I don't know how to paint very well. The parts are A36 Steel, after cutting on the mill, I sanded, and cleaned with mineral spirits (out of acetone, it seems to do better), so there wouldn't be a bunch of cutting fluid on them. I painted, and the coating looks great, shiny, black, just like my stove. But at closer inspection, i can take my fingernail and chip off small bits of the paint. It's like it is sticking to itself, but not so much the metal. What's my best course of action here? Sand all of it, primer this time and start again, or is there a faster way? Thanks for any help. It's mild temperature wise right now, thought it would be perfect.



__________________
jnnewton is offline  
 
Reply With Quote Quick reply to this message
Old 03-18-2011, 06:22 AM  
kok328
Supporting Member
HRT_SUPPORTER.png
 
Join Date: Nov 2007
Location: Grand Blanc, MI
Posts: 2,145
Liked 93 Times on 82 Posts
Likes Given: 60

Default

Strip the paint off an start over.

This time clean them with something that leaves no residue (CRC Brakleen) is an excellent product for this purpose.
Then apply primer following the instructions on the can.
Then apply your paint following the instructions on the can.



__________________
kok328 is offline  
 
Reply With Quote Quick reply to this message
Old 03-23-2011, 12:16 PM  
HDwetPaint
Junior Member
 
Join Date: Nov 2010
Location: chicago, IL
Posts: 15
Default

Hey Jnnewton, sounds like a pretty cool project you got there.
Before anything when you are painting you want to apply a primer to ensure proper base coat adhesion.
Everything else you did was great and use of brake clean to degrease is a good idea but use of mineral spirits or paint thinner should work just fine, just be certain to use a primer that is designed for metals and you shouldn’t have any trouble at all. Good luck!

__________________

Jeff With [URL="http://community.homedepot.com/"]The Home Depot[/URL] Chicago.

HDwetPaint is offline  
 
Reply With Quote Quick reply to this message
Old 08-12-2011, 07:49 AM  
jnnewton
Junior Member
 
Join Date: Mar 2011
Location: kansas city, kas
Posts: 2
Default

I wanted to thank everyone for the thoughts on this, it seems that after a few tries, I managed to do it right, although I couldn't tell you what the difference was.

__________________
jnnewton is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Paint Preparation (Chipped up Paint on Walls) oOoLaLaALA Painting Forum 8 02-22-2012 11:24 AM
remove paint from old metal chairs pedsot Painting Forum 6 08-10-2010 07:54 PM
Best paint to refresh metal lawn chairs? BenzMama General Home Improvement Discussion 3 04-19-2009 07:41 AM
Metal Tile designfiend General Home Improvement Discussion 0 01-09-2009 09:43 PM
Metal studs mmcvicker Electrical and Wiring 3 01-10-2008 10:43 AM