jimmybirdie

I posted this in the General forum but didn't really get an answer.

I am buying a house and I thought about replacing the cabinets but we can't afford to spend 20K right now. The cabinets are in good shape but a little bit dirty and the wood color is too light for me.

I am thinking about either painting or staining the cabinets. My question is which method will give me the best result considering that this is my first home improvement project.

Currently my plan to to remove one kitchen door, sand it, stain it and wait to see the result. If it turns out bad I may then try to sand it again and then paint it. I will get the keys in march so right now it is just planning.

Please feel free to give me any tip,

Many thanks,

See the pic of the kitchen below.

inspectorD

Save yourself some $$ and time. Just buy a cleaner and start scrubbin. I use steel wool where the stuff gets real bad. You will be pleasantly suprised.
Then when your done, some ol fashion murphys oil soap provides a little shine.

__________________
Just My
Made in the

nealtw

I used waterbase paint and put clearcoat after that.

HDwetPaint

Hey Jimmybirdie that’s a nice looking kitchen and I agree with you everything being very light in there I think it will look better with a darker contrasting cabinet color. First before anything like you had mentioned test your new color or coating on an area that won’t be seen or that can be covered up easily, maybe inside a cabinet door. Every piece and type of wood will accept stain differently so using a test piece of the same type is important when doing a large project like this.
If it is stain you decide on you will need to completely remove the existing finish and start with a fresh wood surface best results. When doing a large number of cabinet doors I suggest you start out with a stain and finish stripper, these are mild strippers designed to give you a fresh slate almost ready for stain without damaging or discoloring the wood below. Once the stripper has done its job giving the cabinets a light sanding to help open up some of the wood pores is always a good idea and will give your finished product a much more uniform look. Once you’ve done this you just need to be sure to wash them down with some mineral spirits and remove any dust on the surface and you’re ready to stain.
If it’s a coat of paint you have decided on then it’ll be a bit easier than the above prep work. You will still want to make sure the cabinets are clean and free of any grease or dirt prior to applying your basecoat. Just using a mild household degreaser or a mild detergent such as a few drops of dish soap in a gallon of warm water will be just fine. After the cabinets have dried you will again want to lightly sand them, as mentioned above a medium steel wool works great for this or even some fine grit sandpaper. This step is just to ensure proper adhesion of the next steps just a “scuff coat” you aren’t trying to remove much material at all so this is a pretty quick step. Once you have this done you are ready to prime then paint. Another cool option with painted cabinets dependent upon what color you decide on is a glaze top coat, it is used to accent the cabinet’s unique woodwork and give it a completely different look.
Whatever it is you decide to do be sure to ask any questions you may have regarding your upcoming project.

__________________
Jeff With [URL="http://community.homedepot.com/"]The Home Depot[/URL] Chicago.

3gmp

I added some moulding, beadboard and trim had mine painted with oil based paint. I would strongly suggest having the doors and drawer fronts sprayed. It has been almost a year and a half and they look great.


Good Luck!

jimmybirdie

Hi 3gmp,

Very nice kitchen. I also plan to add the handles like you have there.

Did you have experience spray painting before working on the doors and drawers? How many layers did you spray? Did you use paint brush or roller on the rest of the cabinets. If I decide to paint, I think I will try spray paint the doors and drawers first. Worst case, I just strip the paint and do it again.

I have yet to decide wether to stain or paint yet. I will try staining one door and see how it goes.

jimmybirdie

HDwetPaint,

Thanks for your detailed message. I will try staining the backside of one door first. I will attempt to list the steps for staining, please correct me if I miss something:
1. Remove doors and drawers
2. Use Stain and Finish Stripper to remove existing finish
3. Sanding
4. Wash with mineral spirit, dry
5. Staining,

Thanks,

3gmp

We painted the frames with a mini roller, but had someone professionally paint the doors. We have about 60 doors and drawers and it was too big of a job for us to do. Our painter did two coats front and back.

A neighbor used Gel Stain on her cabinets and they look fabulous. If you have a small vanity or something you might want to try some techniques on that or buy an old cabinet on Craigslist or your local Habitat for Humanity store.

What kind of wood are those cabinets?

jimmybirdie

3gmp,

I have no idea what kind of wood it is or if it is even wood. I worried that it might be some kind of laminate. I didn't have time to inspect the cabinets carefully. We spent an hour at the house and then decided to buy it. I haven't have access to it since. Right now we are in escrow and hope to get the keys in march.

thanks,

3gmp

It is a lovely large space. The area with the 4 cabinets alone in the first picture would look great if you put some beadboard up as a backsplash (painted or stained like your cabinets) had the doors cut for glass added some corbels under the cabinets to make a china hutch area.

I can't wait to sse your transformations.