DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Painting Forum > painting/fixing wood chipped doors?




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 04-25-2011, 05:46 PM  
HomeRepairMike
Junior Member
 
Join Date: Apr 2011
Location: Los Angeles, CA
Posts: 12
Default painting/fixing wood chipped doors?

I have some doors that are cracked/chipped and I want to paint over them. What can I do to fix the chips and paint the doors? The images are attached.

Thanks!



door.jpg   door2.jpg   door3.jpg  
__________________
HomeRepairMike is offline  
 
Reply With Quote Quick reply to this message
Old 04-26-2011, 12:56 PM  
epox
Junior Member
 
Join Date: Mar 2011
Location: montgomery, alabama
Posts: 9
Default

The last two pics look like water damage....you will need to stop the water from splashing on the doors or it will do it again after you patch it.... first pic looks like some chaulk or painters putty will do the trick.....second pic chaulk if the wood is not rotten ....if rotten dig the soft wood out and use a exterior grade spackling....also use the spackling for the last pic,

__________________
epox is offline  
 
Reply With Quote Quick reply to this message
Old 04-30-2011, 06:24 AM  
joecaption
Senior Member
 
Join Date: Jan 2011
Location: Hartfield VA, VA
Posts: 1,361
Liked 38 Times on 33 Posts
Likes Given: 2

Default

The first picture to me looks like your paint line cracked between the doors sile and the molding that holds in the pane of glass. Just sand it with a drywall sponge with an angle on one end and repaint. It cracked because someone did not cut out the paint line between the glass and the molding, wood expands and contracts glass does not.
I agree with the water damage in the second picture and you will always be fighting with that door because someone install the outside patio to high. There needed to be a min. of 4" from the threshold and the patio. There also needs to be a gutter over that area to reduce splash back.
If waters already wicked up that high and on the back side you can bet that there's more hidden damage to the door inside of it and under it.
What we do when we have to deal with this situation is replace the whole door as a unit. But this time the door gets sat in a sill pan, the door will be fiberglass and I order it with vinyl jams and vinyl brick molding.

The last picture looks like a cheap louon door that's delaminated. You can try patching it with Burmans Water putty or bondo, sanding it and priming and painting or just replace the whole door panel for about $25.00. If it was mine and I wanted to dress it up I buy a new prehung raised panel door for less then $75.00.

__________________
joecaption is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Painting Pre-Hung Relia-Bilt Doors jef1 Painting Forum 7 06-22-2013 04:49 PM
Painting interior and exterior doors milbry18 Painting Forum 4 10-11-2011 03:13 AM
Have to use oil enamel paint on interior wood doors? D725A Painting Forum 19 05-15-2011 07:41 AM
Painting fiberglass entry doors mozingod Windows and Doors 2 11-14-2008 05:18 PM
Painting Doors eastwood Windows and Doors 1 06-03-2007 07:05 PM