DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Decorating and Design > Finishing any ideas?




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 10-14-2012, 11:25 AM  
bryce
Senior Member
 
Join Date: Jun 2010
Posts: 143
Liked 3 Times on 3 Posts
Likes Given: 7

Default Finishing any ideas?

I'm a bit stuck on the finishing of this place. I've got sloped ceiling, beams, short ceiling between the joists, walls and of course floor.

The carpenter of course wants me to finish with wood all over the place. He wants to rip 1" rough pine to 1/2" and put in one the ceilings and beams. But pine is so common and it will just look like plywood after awhile and end up painted.
The other problem is dust. I am getting sick from day after day of dust. Yes i know living in a renovated house was not the best plan but i saved on rent.
I was thinking drywall and paint. But now i think winter is upon us and i can not deal with dust and paint fumes.
So what i figure now is finish everything with hardboard and wall paper with textured wallpaper. Then paint next summer when i can open the windows of go camping for a week.
I'm thinking leave the beams exposed too. Here's the photo what do you think? This is what you might call 1/4 of the main floor, the other side of the house is exactly the same. Kitchen, study, living room. I'm thinking gets some nice hickory for the kitchen, would put drywall there for safety. My plan was to build my own kitchen bottom cabinet with granite tile system and finish with the wood, open shelves for dishes and pots and pans. I've already order the 2 burn flat top stove and under the counter fridge.



abc_0992.jpg   abc_0993.jpg   abc_0994.jpg  
__________________

Last edited by bryce; 10-14-2012 at 11:31 AM.
bryce is offline  
 
Reply With Quote Quick reply to this message
Old 10-14-2012, 11:34 PM  
AndyGump
Drawer of Homes
 
AndyGump's Avatar
 
Join Date: Mar 2011
Location: Orange, CA.
Posts: 56
Liked 5 Times on 3 Posts
Likes Given: 2

Default

Oh my god Bryce, I have seen some of your other posts on this place and all I can say is to recommend that you get some professional help for it and stop hiring hacks to do your work.

I am sorry, I do not mean to be a Pri** but it looks like you have 2x6s @ 24" centers, spanning about 12' with a storage area with knee wall in about the center of the span. I hope you don't get much snow were you are.

Andy.

Andy.



__________________
AndyGump is offline  
 
Reply With Quote Quick reply to this message
Old 10-15-2012, 05:16 AM  
bryce
Senior Member
 
Join Date: Jun 2010
Posts: 143
Liked 3 Times on 3 Posts
Likes Given: 7

Default

Hi Andy i wish you could be more detailed with your answers. The 2x6" are supported by 2x4 along the kneewallm then and Pl to the main joistets of the ceiling. We've only added insulation and not putting wood up there. The only added weight are the 2x6" that are well supported, how much can that be?
The roof is metal and all the snow slides off.
I'm not sure what your point is?

So what am i suppose to do now? The only difference here is the 2x6's but i think are well supported?

__________________

Last edited by bryce; 10-15-2012 at 07:33 AM.
bryce is offline  
 
Reply With Quote Quick reply to this message
Old 10-15-2012, 08:16 AM  
nealtw
Senior Member
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 8,983
Liked 687 Times on 615 Posts
Likes Given: 1210

Default

Bryce; The 2x6 were only intended to carry the weight of the ceiling. Today in a new house you would find 2x10s if a floor is going to be added. Who ever built this area probably also removed an angle brace from the midspan of the rafters to above the barring wall. So now any flexing in the roof is piked up by these 2x6s and there is a possibility of dammage, evan heavy winds can do that.
That being said, we see a lot of stuff in old houses that don't make sense and they don't always fall down. By the look of the lumber up there it does look like it's it been there a long time.
The quick fix would be to double up the 2x6s. A new 2x6 along side the old one won't double the strength but will add alot.

__________________
nealtw is online now  
 
Reply With Quote Quick reply to this message
Old 10-15-2012, 11:29 AM  
bryce
Senior Member
 
Join Date: Jun 2010
Posts: 143
Liked 3 Times on 3 Posts
Likes Given: 7

Default

Hi Neal, i got rid of the clowns and have new guys in today. That's exactly what they said!

__________________
bryce is offline  
 
Reply With Quote Quick reply to this message
Old 10-15-2012, 02:03 PM  
nealtw
Senior Member
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 8,983
Liked 687 Times on 615 Posts
Likes Given: 1210

Default

While there at it have them put solid blocking between the joists directly under the nee wall. It is both insulation and fire stop and there should be bridging or blocking on any floor more than 7 ft anyway.

__________________
nealtw is online now  
 
Reply With Quote Quick reply to this message
Old 10-15-2012, 07:10 PM  
bryce
Senior Member
 
Join Date: Jun 2010
Posts: 143
Liked 3 Times on 3 Posts
Likes Given: 7

Default

Actually those 2.5"x6.5" are plenty strong. I think we went through this before, what you see bowing is not caused by excessive weight but rather wick effect of the facia not being fixed and leaking for years. The other side is perfect straight.
For example there is a cracked beam (not the split in the basement) that i can hang from and it won't even budge. There is no new weight except the 2x6's and 7" of roxal. I see what your saying if there is heavy snow. But snow just slides of the metal roof. But didn't i just add support with new 2x6" and 2x4" along the knee wall? It's jammed in there it's not going anywhere. If it lasted this long why would it get worse? If anything the roof is much stronger now. Or am i not understanding you?
It's it fair to say i can just leave it and if some beam cracks in the future i could sister it or take further action? But why bother, even the cracked beam i can just PL or do nothing.


I think i'm going to get a dry waller to finish the ceiling. I'd like to keep beams open.
Is that dry rot? I sanded some off, can i just paint it over do i have to treat it or continue sanding. I rather not.

The new guys want me to go the permit route. I can help not wanting to have some inspector sniffing around on a regular basis. The new guys seem really effective though.
I need a rest from this project, maybe i just live with it for a while, it's not really so bad as a place to live. DIY and work with the neighbours. I just need the other side of the house framed and insulated. I walked into the permit office and filled the application, the clerk coached me on the drawings but then sent me away to do it properly. I spent 2 hours with new guy and we made nice computer drawings. I guess permit are good idea to be safe, but then again they seem like a cash grab. Then i'll be up for all sort of problems...

__________________

Last edited by bryce; 10-15-2012 at 07:28 PM.
bryce is offline  
 
Reply With Quote Quick reply to this message
Old 10-15-2012, 07:47 PM  
nealtw
Senior Member
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 8,983
Liked 687 Times on 615 Posts
Likes Given: 1210

Default

Sounds like you have found the right guy this time. Hacks never want you to have a permit. The good guys sometimes will make small changes with out a permit. Your house is so far away from code and they don't want to sell you a bunch of changes that the inspectors would let slide.
What ever you added to the nee wall will make everything stiffer but keep in mind all that weight and some of the roof weight is on those 2x6s.
Are you thinking you can drywall to the underside of the sheeting? In a word no. Run the drywall across the bottom of the joists.

__________________
nealtw is online now  
 
Reply With Quote Quick reply to this message
Old 10-17-2012, 10:50 AM  
bryce
Senior Member
 
Join Date: Jun 2010
Posts: 143
Liked 3 Times on 3 Posts
Likes Given: 7

Default

Na they are just another version of the old guys. They want to get the permits because they know there will be plenty of things wrong to make money on.
If we've been practically blowing the place up in the last 3 weeks and no peep why would i need a permit now? Basically for what i'm doing a permit is not need anyways, only for putting a sliding door or deck.

So, here's what i'm thinking now, leave the walls on the other room as is good old cord wood. Why spend all that time and money to try and get the same look?
My question is how cold will it be if i just insulate the slopped ceiling with R30 or R40? i think i could eventually have foam sprayed on the outside. I guess that would be a problem for the siding. Does anyone know about that ?
Do you all think it is a crazy idea? How much support would that insulation require up there? 2x6 or 2x8 or even stringers would work, since i'm on my own now. I think it is best to just DIY now slowly and consider it like a part time job for myself.

I think i'm just going to prime all that wood then paint it a red/brown. Sanding would probably kill me.

__________________
bryce is offline  
 
Reply With Quote Quick reply to this message
Old 10-17-2012, 12:07 PM  
nealtw
Senior Member
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 8,983
Liked 687 Times on 615 Posts
Likes Given: 1210

Default

Around here the building inspectors are the home owners safety system. Like everyone here, your contractors look at your house and say it's so far away from code where do you start. All you want to know is what you can do to make it safe and livable and looks good too. Everyone looking will see different things that are wrong. The problem your having we all have a different idea what needs to be done.
I've done work in some pretty sad houses with permits and when the inspectors walk thru, they try not to look at old things that were not part of the permit. Sometimes they see things that they don't like and stop and look but don't say anything unless asked.
A homeowner doing things without permits dosn,t bother me much if he has complete trust in his contractor or has a good understanding of structure or plumbing or wiring and knows mostly what he is doing.
So may I suggest you do some research, there is lots of information here and other places. You need to calculate the load on the 2x6 floor joists and then check the span load for 2x6 rough cut old growth fir and make an informed dissision and then look at fire stopping and attic or roof ventulation. You will also want to take a good look at the wiring to see if upgrades will be wanted while you have it open, same for plumbing.
I have seen your frustration show up,but keep in mind people are trying to help and what ever we want to learn tends to cost money and time.



__________________
nealtw is online now  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Finishing basement Minnie1214 Painting Forum 9 01-17-2012 10:53 AM
help with 'finishing' new porch darceegood Pest Control 2 10-12-2011 07:12 PM
Finishing a basement Tomjuan78 General Home Improvement Discussion 2 09-20-2007 07:02 PM
Finishing the garage magno Flooring 2 07-31-2006 09:15 PM
Finishing off a Tub surround Moe6763 General Home Improvement Discussion 3 07-28-2006 07:46 PM