DIY Home Improvement, Remodeling & Repair Forum

DIY Home Improvement, Remodeling & Repair Forum (http://www.houserepairtalk.com/forum.php)
-   Decorating and Design (http://www.houserepairtalk.com/f108/)
-   -   Soffitt cleaning and painting (http://www.houserepairtalk.com/f108/soffitt-cleaning-painting-930/)

Daryl in Nanoose 07-01-2006 09:42 AM

Soffitt cleaning and painting
 
How do you painters clean metal soffitts for painting. I have a house to do and I am going to spray paint them on a calm day but can not quite figure out how to clean them without blasting water up inside and still give it a good rince. Also what kind of paint(not brand name) would you reccomend on metal soffitts.

Square Eye 07-01-2006 10:47 AM

Tsp or Superclean and a sponge. Sometimes a Scotch-brite pad. A light stream of water is all you need for soaking and rinsing.

Then latex exterior paint. Latex doesn't get so hard and peel off like oil does on thin metal.

Daryl in Nanoose 07-01-2006 08:07 PM

Thanks a bunch Square Eye

handypilot 07-20-2006 03:05 PM

Quote:

Originally Posted by Square Eye
Tsp or Superclean and a sponge. Sometimes a Scotch-brite pad. A light stream of water is all you need for soaking and rinsing.

Then latex exterior paint. Latex doesn't get so hard and peel off like oil does on thin metal.

Square Eye is right on! I would certainly use TSP, because it will remove any chalky paint. It will also remove mold/mildew is mixed with bleach, but make sure the brand you use can be mixed with bleach (most can).

When spraying latex make sure you get a sprayer that supports a 621 tip size, especially if you spray latex primer first! Priming isn't a must, but primers have more binders in them than pigment, so the odds of peeling with be greatly reduced!

BTW, Square Eye for the Tool Guy! Funny!!!:D

Square Eye 07-20-2006 03:29 PM

Thanks Handypilot!

Nice avatar!

Welcome to the forum, stick around and be a regular!


All times are GMT -6. The time now is 07:48 PM.