DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Walls and Ceilings > Crown molding




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 12-19-2012, 02:58 PM  
windowman@verizon.net
Junior Member
 
Join Date: Nov 2005
Location: West Chester, PA, near Phila., Pennsylvania
Posts: 1
Default

Rocklear has a great jig +/- $15.00 that has proper positioning printed on it and sandpaper front and back so molding stays in place on jig and jig stays in place on saw.



__________________
windowman@verizon.net is offline  
 
Reply With Quote Quick reply to this message
Old 12-19-2012, 05:21 PM  
mabloodhound
Restoration & Renovations
 
Join Date: Jun 2008
Location: Halifax, MA
Posts: 39
Liked 3 Times on 2 Posts

Default

I've done a lot of crown and I always cope my inside corners. This way you never have to worry about the angle.
Outside corners, yes, you do have to adjust for the angle if necessary.
Another option that is even easier is to use corner blocks, specially made for crown. Although not necessarily authentic, they do look good and all crown is just cut square. That was one of the fastest crown jobs I ever did.
Corner blocks come in various styles to match your crown. The last ones I used were synthetic Fypon type material.



__________________
mabloodhound is offline  
 
Reply With Quote Quick reply to this message
Old 12-23-2012, 01:54 AM  
dthornton
inspector gadget
 
Join Date: Apr 2012
Location: Red Oak, IA, Iowa
Posts: 181
Liked 17 Times on 15 Posts
Likes Given: 86

Default

Like Neal said, drywall corners are never square. I suggest getting a few extra pieces of molding (6" - 12") to use as test pieces to set the angle on your saw. Sometimes places like Home Depot will let you have the scrap pieces that are left over when other customers cut the molding they want. Cut the ends of your scrap and see if they fit. If not, make your adjustment on your saw, and just shave a little off the edges and try again, until you get the perfect fit.

__________________
dthornton is offline  
 
Reply With Quote Quick reply to this message
Old 12-24-2012, 09:01 AM  
jmc0319
Senior Member
 
Join Date: Jun 2012
Posts: 275
Liked 31 Times on 22 Posts
Likes Given: 5

Default

Great suggestion. I will certainly experiment first.

__________________
jmc0319 is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Removing crown molding daytona Walls and Ceilings 1 08-06-2012 12:13 PM
Crown molding billyo Carpentry and Woodworking 12 06-30-2012 09:09 PM
Crown Molding, Kitchen cabinets powersro Carpentry and Woodworking 6 02-07-2011 07:51 PM
Crown Molding - Going Bananas! sharper Carpentry and Woodworking 5 09-19-2008 10:10 PM
How to cut crown molding spyder9176 Carpentry and Woodworking 7 03-04-2008 10:13 AM