DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Walls and Ceilings > How to Finish Garage Walls





Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 05-16-2010, 01:28 PM  
inkaytown
Junior Member
 
Join Date: May 2010
Posts: 1
Default How to Finish Garage Walls

Hello Every One,

The builder has given un-finished dry walls and would like to get the garage painted. what are the best ways to fill those gaps and get it painted.

Here are the Pics



__________________
inkaytown is offline  
 
Reply With Quote Quick reply to this message
Old 05-16-2010, 05:40 PM  
Nestor_Kelebay
Emperor Penguin
 
Nestor_Kelebay's Avatar
 
Join Date: Mar 2009
Location: Winnipeg, Manitoba
Posts: 1,844
Liked 2 Times on 2 Posts

Default

1. Hold a bright light beside the drywall screw heads and drywall joints and either add mud or sand it down to get the surface flat with the surrounding wall. Repeat Step #1 until the joint compound over the drywall screws and over the joints is smooth and flush with the surrounding wall surface.

2. Prime with a latex primer.

3. Paint with a latex or oil based paint.

You should decide what you want to do with the bare concrete. During the spring, there will be condensation forming on that concrete because it will remain cold for a long time come spring. You probably want to anchor spruce 2X2 strapping to the concrete and insulate that concrete and cover with either drywall or a more water resistant material like Georgia Pacific "Dens-Shield".

If it were me, I would use extruded polystyrene foam as the insulation rather than fiberglass. Extruded polystyrene foam is impermeable to air, and so it doesn't need a vapour barrier. You simply press it into the space between your 2X2's, fill any gaps between the foam and lumber with expanding polyurethane foam, cut off any foam that sticks out proud of the lumber, and cover with drywall or Dens-Shield.

I'd be inclined to use Dens-Shield over concrete simply because the cold concrete behind the Dens-Shield and polystyrene foam is going to suck up heat like a sponge come springtime when the weather warms up, and I'd be concerned that condensation would form on any drywall in the vicinity of that concrete.

__________________
Nestor_Kelebay is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Moldy Walls, Holes in Walls and Door WFIT Walls and Ceilings 2 07-01-2009 07:56 AM
cheap way to "finish" wall in garage cmjmed Carpentry and Woodworking 11 04-06-2009 11:53 AM
Level 5 Finish SPISurfer Flooring 1 03-06-2009 06:49 PM
How to finish basement window sunshinewa General Home Improvement Discussion 3 02-18-2009 01:22 PM
Wanting to Finish Basement. kotah General Home Improvement Discussion 7 08-04-2008 06:36 AM