Go Back   DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Walls and Ceilings

Home DIY Remodeling Rennovation Repair Forum

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 07-15-2007, 06:27 AM   #1
ladyray
Junior Member
 
Join Date: Jul 2007
Location: South Africa
Posts: 4
Default Painting knotty pine wood panels

Hi everyone... We have just bought our house and the kitchen has got knotty pine panels.. anyway i want to paint the panels but am not sure how to do this and what the end result will look like is there anyone that can help and give me some advise if this is the right option or should i just pull them down and them paint..
ladyray is offline   Reply With Quote
Old 07-15-2007, 10:04 AM   #2
Daryl in Nanoose
Senior Member
 
Daryl in Nanoose's Avatar
 
Join Date: Feb 2006
Location: Nanoose Bay BC
Posts: 675
Default

I use notty pine all the time and when I want it painted I always follow the following procedures. This is for pine that has some kind of finish already on them
I first clean all the surfaces with warm water and TSP and with warm water I well rince .
Sand with 150 sandpaper, vacume and Tack cloth everthing to elimanate any left over dust particals.
Prime with Kilz Original oil based primer ( 2 coats recomended) and let cure for a day ( the longer primer has to sit the better it is) then sand with 150 - 180 grit paper then Vacume off and go over all of it with a Tack cloth. Then apply 2 coats of either a oil based or latex based interior paint ( your choice of sheen).
Take the doors off for this as well as all the hardware and lay the doors down on some spacers so you can do the edges ( books work good for this). This helps elimanate runs.
Also screen the primer and paint with a prchased paint screen or a pair of nylons.
Daryl in Nanoose is offline   Reply With Quote
Old 07-16-2007, 01:19 PM   #3
ladyray
Junior Member
 
Join Date: Jul 2007
Location: South Africa
Posts: 4
Default

thank you Daryl that was very helpfull.... when you say my choice of sheen what do you mean? my choice of coulor?
ladyray is offline   Reply With Quote
Old 07-16-2007, 07:39 PM   #4
Daryl in Nanoose
Senior Member
 
Daryl in Nanoose's Avatar
 
Join Date: Feb 2006
Location: Nanoose Bay BC
Posts: 675
Default

Your welcome, glad I could help. Sheen Humn!!! can't think of how to explain this with a single word ( very, very long day). Paints come in a variety of glosses starting from flat to high gloss, semi gloss is a very good choice for this since it is very durable and scubable but not every body likes it so low luster would be a good second choice. Stay away from flat paints since they tend to leave finger prints all the time and can mark quite easy. Ben moore has a good selection of paint and I would suggest you go to a local ben moore store and taolk with them and they will set you up. Sherman Williams is another good one acording to some of the people on this site but personaly I have never used them. Hope this helps.
Daryl in Nanoose is offline   Reply With Quote
Old 07-26-2007, 02:20 PM   #5
Mom2Derek&Sammy
Junior Member
 
Join Date: Jul 2006
Location: california
Posts: 1
Default re:

Sorry to nudge in here but I have a question about this as well...does the Kilz Original oil based primer effectively seal in the knots? I have read that you need to use some special primer that will not let the knots bleed through if you would like to keep them under the paint (which is what I'm looking to do).

Thank you!!!
Mom2Derek&Sammy is offline   Reply With Quote
Old 07-26-2007, 03:12 PM   #6
cibula11
Senior Member
 
Join Date: Dec 2006
Location: Iowa
Posts: 325
Default

I used Zinnser Gardz. It prevents knots from bleeding through. Very messy but it worked.
cibula11 is offline   Reply With Quote
Old 07-26-2007, 05:47 PM   #7
Square Eye
Senior Member
 
Square Eye's Avatar
 
Join Date: Jan 2006
Location: Western KY
Posts: 1,277
Default

The Zinnser line of stain killing primers is impressive, but not always available here.
Kilz is very popular and is generally recommended for that reason.
Square Eye is offline   Reply With Quote
Old 07-28-2007, 08:15 AM   #8
Daryl in Nanoose
Senior Member
 
Daryl in Nanoose's Avatar
 
Join Date: Feb 2006
Location: Nanoose Bay BC
Posts: 675
Default

If you apply 2 coats of Kilz original oil based primer you should be good to go. thats what I have done in the past with no issues so far.
Daryl in Nanoose is offline   Reply With Quote
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Painting Pine cibula11 Decorating and Design 4 08-14-2008 09:46 AM
Painting Beadboard panels. Hack Decorating and Design 13 01-28-2008 11:47 AM
Painting Wood Paneling Ian Decorating and Design 5 01-13-2008 09:47 PM
Painting Wood Siding Woes kai Roofing and Siding 1 07-14-2007 12:20 PM
oiled knotty pine walls - paint or remove yankcollector Flooring 4 07-21-2006 06:36 PM



New!
Plumbing Forum

Search Forums


Sponsors

All times are GMT -6. The time now is 06:44 AM.

Bike & Cycling Forums × Airsoft Forum × Garage Forum × Home Brewing Forum × Firearms & Gun Forums × Homesteading and Survival Forum × Jeep Forum