DIY Home Improvement, Remodeling & Repair Forum

DIY Home Improvement, Remodeling & Repair Forum (http://www.houserepairtalk.com/forum.php)
-   Walls and Ceilings (http://www.houserepairtalk.com/f109/)
-   -   Strengthening a lime mortar wall? (http://www.houserepairtalk.com/f109/strengthening-lime-mortar-wall-16781/)

lastusername 11-14-2013 03:10 PM

Strengthening a lime mortar wall?
 
I had to replace a furnace pipe recently and the exhaust goes out a basement wall made of lime mortar that's extremely crumbly. A lot of the crumbling mess ended up in the pipe and blocking the flow so that the carbon monoxide and other gases end up in the house. I need this fixed before the next cold patch.

How can I strengthen and shore up the wall in this particular area so that it won't crumble into and around the furnace exhaust pipe?

Please do not lecture me on vapor barriers and wall rot. I'm only after a fix for this small area versus the many cubic feet of crumbling lime mortar that I have. I'd just rather not have my family gassed to death. I would consider space heaters but I'm not sure where all the water pipes are and if I could reach them to install electric heating and insulation.

oldognewtrick 11-14-2013 03:17 PM

What type of pipe did you use to replace the flue pipe and how is the pipe sealed that allows mortar to get in the flue?

lastusername 11-14-2013 03:47 PM

Quote:

Originally Posted by oldognewtrick (Post 93373)
What type of pipe did you use to replace the flue pipe and how is the pipe sealed that allows mortar to get in the flue?

I used a flue pipe and the wall just crumbled as I was removing the old pipe and inserting the new one. Also, the hole in the wall extends much further than I can reach to try to repair past a certain point.


All times are GMT -6. The time now is 10:00 PM.