DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Walls and Ceilings > Water Damage Drywall





Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 09-25-2011, 06:24 PM  
jfl212
Junior Member
 
Join Date: Sep 2011
Location: new milford, new jersey
Posts: 8
Default Water Damage Drywall

I just had a small bathroom renovated. Hurricane Irene caused leakage through the chimney flashing which is above the bathroom. The leak caused bubbling along a trail app. 2 1/2 feet along the ceiling in one line and a 4" long trail of bubbling paint down the wall. The bubbling contained water I have since punctured the bubbles alowing the water to escape. The flashing is fixed. The sheetrock is mold resistant green board. Can I just let the sheetrock dry and then patch or do I have to take it down. There is no insulation over the ceiling trail nor behind the wall as it is an inside wall.



__________________
jfl212 is offline  
 
Reply With Quote Quick reply to this message
Old 09-25-2011, 07:35 PM  
oldognewtrick
Moderator
 
oldognewtrick's Avatar
 
Join Date: Jul 2009
Location: Nashville, TN
Posts: 3,751
Liked 276 Times on 231 Posts
Likes Given: 89

Default

Is the area that was wet still solid or is it soft to touch?



__________________
oldognewtrick is offline  
 
Reply With Quote Quick reply to this message
Old 09-25-2011, 08:41 PM  
jfl212
Junior Member
 
Join Date: Sep 2011
Location: new milford, new jersey
Posts: 8
Default

feels solid

__________________
jfl212 is offline  
 
Reply With Quote Quick reply to this message
Old 09-26-2011, 11:16 PM  
BridgeMan
Senior Member
 
BridgeMan's Avatar
 
Join Date: Aug 2011
Location: Cottage Grove, Oregon
Posts: 712
Liked 62 Times on 57 Posts

Default

I'd remove any unbonded paper (outside drywall layer), skim a coat of new mud on the affected areas, prime coat and texture/paint as needed to match.

__________________
BridgeMan is offline  
 
Reply With Quote Quick reply to this message
Old 09-26-2011, 11:34 PM  
nealtw
Senior Member
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 7,696
Liked 540 Times on 489 Posts
Likes Given: 998

Default

I would cut a few holes to let it dry out for a week or so and then replace the pieces that you cut out.

__________________
nealtw is online now  
 
Reply With Quote Quick reply to this message
Old 09-27-2011, 09:26 AM  
jfl212
Junior Member
 
Join Date: Sep 2011
Location: new milford, new jersey
Posts: 8
Default

Thanks All



__________________
jfl212 is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
MUST I replace a hot water heater that got water damage from Hurricane Irene? Seidperson Plumbing Forum 2 09-12-2011 07:12 PM
Help: Water damage. What to do? leesiulung Walls and Ceilings 6 02-03-2011 07:40 AM
Water Damage JohnnyBoy Walls and Ceilings 1 02-04-2010 02:48 PM
termites/water damage...oh my Rainy Flooring 0 12-02-2008 04:08 PM
How can I tell if this is water damage? JennyL Flooring 2 09-04-2007 09:20 AM