DIY Home Improvement, Remodeling & Repair Forum

DIY Home Improvement, Remodeling & Repair Forum (http://www.houserepairtalk.com/forum.php)
-   General Appliance Discussion (http://www.houserepairtalk.com/f11/)
-   -   Dish washer (http://www.houserepairtalk.com/f11/dish-washer-12964/)

billyo 01-14-2012 06:32 PM

Dish washer
 
Like to know how I can check to see to see if my pump is bad in my dishwasher

joecaption 01-15-2012 07:17 AM

What makes you think it may be bad?
If you Google "appliance repair" there's lots of sites with free parts break downs, FAQ's and on line help.
Your going to need your Model and ser# for anyone to be able to help you on any site.

jeff1 01-15-2012 07:57 AM

Quote:

Originally Posted by billyo (Post 66349)
Like to know how I can check to see to see if my pump is bad in my dishwasher

Hi,

Make, model#?
LINK> Where is my model#, I need a part, where should I look for my model number Some model# helps.

What is or is not happening?

jeff.

billyo 01-15-2012 06:24 PM

I looked on line and first things to check were drain line clogged at the disposal ,
Checked that the next thing was to check pump , it was clean, so I don't know how to check pump to see if it good.

jeff1 01-15-2012 08:16 PM

Quote:

Make, model#?
??


jeff.

billyo 01-20-2012 12:47 PM

Quote:

Originally Posted by jeff1

??

jeff.

The make and model
Fdb2310lcc2

billyo 01-20-2012 12:50 PM

Quote:

Originally Posted by billyo

The make and model
Fdb2310lcc2

Frididaire

billyo 01-20-2012 01:00 PM

[QUOTE="jeff1"]

??

Model fdb2310lcc2 frigidaire

woodchuck 01-20-2012 01:52 PM

http://www.searspartsdirect.com/partsdirect/part-model/GE-Parts/Dishwasher-Parts/Model-GSD3420Z02BB/0432/0130000/E2134705/00003?blt=06&prst=&shdMod=


There is a link to a diagram of your dishwasher. I believe the impeller throws the water into the pump to be pumped out. I have seen the impeller bent and not throwing the water out . That may be what is making the noise in yours.

jeff1 01-20-2012 07:12 PM

Quote:

Fdb2310lcc2
This d/w has 2 pumps...one for washing only and one for draining only.

The one for draining is #60 linked here.

This is an electric motor and pump....it will receive 110-120 volts AC to operate. Receiving power and the drain lines to and from the pump are ok = new drain pump time. Can hummmm and not run, can break inside, can get clogged inside, can quit dead.

http://www.rcappliancepartsimages.co...1-00900269.jpg
Drain pump and motor assembly Manufacturer Number 154640201

jeff.


All times are GMT -6. The time now is 04:53 PM.