DIY Home Improvement, Remodeling & Repair Forum > Appliances > General Appliance Discussion > GE profile refrigerator condenser fan motor trouble





Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 10-21-2008, 01:09 PM  
David B
Junior Member
 
Join Date: Oct 2008
Posts: 2
Default GE profile refrigerator condenser fan motor trouble

I've got a GE model PDS22SCRBRSS that has a condenser fan motor that won't operate. My scenario is exactly the same as the one that posted on 7-1-2008. This too is a dc fan motor. I originally replaced just the fan motor, but the new motor did not work. After reading the post fron 7-1, I ordered a replacement main board and a new fan motor. I have not been able to operate any of these fan motors with an independent 12 volt power source. I installed the new motor and board today, but the motor still does not work. I have 13 volt dc down to the plug connector. I have even gone so far as to pull apart the plug to confirm that I am getting a good connection. Any suggestions?



__________________
David B is offline  
 
Reply With Quote Quick reply to this message
Old 11-04-2008, 12:00 PM  
David B
Junior Member
 
Join Date: Oct 2008
Posts: 2
Default GE technicain solves the problem

Today, The factory authorized GE technician came out to repair this fan motor issue. He checked voltage at the motor plug, found 13 vdc. He pulled a replacement motor off his truck, plugged it in and it worked. He said we did all of the right things and had no expalnation for why his motor worked while our motor did not. He did say that this is a variable speed motor, and that the control board sends out a sender voltage that enables the opertion of the motor. He said that it is difficult to operate these motors by applying a field supplied voltage source to the motor, it must come from the control board. He also stated that a failure of the board will not fail the motor, but that a motor failure can take out the control board. If the control board has failed, that you may still see 13vdc supplied to the motor plug, but if the board is in fact defective, that when you plug in the motor that the volatge will disappear or be substantially lowered. This was never the case for this situation, even with the motor plugged in, we had 13vdc available. It appears that the motors that were sent to us from GE parts were themselves, in fact, defective. Hope that this helps anyone else that may run across a similiar problem with this GE refrigerator.

__________________
David B is offline  
 
Reply With Quote Quick reply to this message
Old 11-04-2008, 05:56 PM  
Square Eye
Senior Member
 
Square Eye's Avatar
 
Join Date: Jan 2006
Posts: 1,273
Liked 4 Times on 4 Posts

Default

Thank you for the follow-up! Very informative

__________________

[URL="http://www.houserepairtalk.com/announcement.php?f=39&a=6"][size=3]The Ten Commandments of House Repair Talk[/size][/URL]



[URL="http://home.bellsouth.net/p/s/community.dll?ep=16&groupid=289528&ck="]Square Eye's home page[/URL]

Square Eye is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
GE Profile refrigerator condenser fan not turning on Quattro HVAC 18 08-31-2012 07:22 AM