DIY Home Improvement, Remodeling & Repair Forum > Appliances > General Appliance Discussion > kenmore washing machine





Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 07-22-2009, 04:42 PM  
archbarb
Junior Member
 
Join Date: Jan 2009
Posts: 4
Default kenmore washing machine

My wife called me today and said the spin cycle wasn't working on the washing machine. She said It was making an awful racket when the spin cycle started. When I got home I put it in the spin cycle and it did pump out the water, but it was making a very loud noise. I stopped it, and tilted it to the wall and started it again. It looks like the motor is turning, not sure what else it may be. Its a Kenmore model # 110.20772990. Its probably close to ten years old. Maybe worn out. There are five people in our household and it is used often. Any help in what to look at would be great.

Thanks,
Archie



__________________
archbarb is offline  
 
Reply With Quote Quick reply to this message
Old 07-23-2009, 12:17 AM  
Nestor_Kelebay
Emperor Penguin
 
Nestor_Kelebay's Avatar
 
Join Date: Mar 2009
Location: Winnipeg, Manitoba
Posts: 1,844
Liked 2 Times on 2 Posts

Default

All Sears Kenmore washers or dryers with model numbers starting with 106 and 110 were made for Sears by Whirlpool.

Here's a web page from a fellow I've known for years who's an appliance repair technician by day, and a crime fighting superhero by night:

http://www.applianceaid.com/searscodes.html

Well, the standard things that can cause a lot of problems in any washer are clothes getting in between the inner wash tub and the outer drain tub. Any item of clothing that goes over top of the inner tub and gets in between the two tubs can prevent the washer from achieving a proper spin speed and make a lot of noise too.

And, if clothing does get between the two tubs, then it's very possible that it can get drawn in to the washer's water pump.

So, the first thing to do would be to remove the front panel on the machine and look for anything in the transluscent plastic body of the washer's water pump. If you can't use a small inspection mirror and flashlight to see if there's anything between the inner (perforated) wash tub and the outer drain tub, you'll need to lift the top of the machine (washers are normally hinged at the back so that you can raise the top), and look between the two tubs for anything that may have gotten between them.

And, when you have the front cover of the machine off and it's not operating, check to see if the motor is particularily hot. An excessively hot motor is an indication that the motor has to overcome excessive resistance in the machine to make it run; another indication of clothing caught between the two drums.

http://www.applianceaid.com/beltwasher.html

PS: "Inglis" is a name that's probably unknown to most Americans. Whirlpool washers and dryers are sold in Canada under the name "Inglis". So, a Canadian Inglis washer or dryer is identical to an American "Whirlpool" washer or dryer. Kenmore, on the other hand, is sold by Sears in both Canada and the US, and most of the time, Kenmore is made by Whirlpool. I don't think you can buy Whirlpool appliances in Canada, only Inglis.
It's a similar story with "Speed Queen" in Canada and "Amana" in the US. Amana sells washers and dryers under the name "Speed Queen" in Canada.
Presumably, both Amana and Whirlpool have Canadian subsidiaries (Speed Queen and Inglis, respectively) to market their products in Canada.



__________________

Last edited by Nestor_Kelebay; 07-23-2009 at 12:48 AM.
Nestor_Kelebay is offline  
 
Reply With Quote Quick reply to this message
Old 08-01-2009, 06:47 AM  
archbarb
Junior Member
 
Join Date: Jan 2009
Posts: 4
Default

Ended up being coupling from motor to gear box. Spent $19.00 for new coupling. Works great. Sure beats having to by new machine.

__________________
archbarb is offline  
 
Reply With Quote Quick reply to this message
Old 08-03-2009, 07:59 AM  
bpinkbinkie
Junior Member
 
Join Date: Aug 2009
Posts: 3
Default Kenmore

That's why I love Kenmore appliances...you can get your own parts and fix it yourself at a very reasonable price. Just remember to unplug the appliances first before fishing around!

__________________
bpinkbinkie is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
LG laundry washing machine 'shaking' semidevil General Appliance Discussion 12 04-18-2012 02:20 AM
washing machine making noise Drew_2kXJ General Appliance Discussion 4 11-14-2009 02:31 AM
Washing Machine stopping in midcycle bjl584 General Appliance Discussion 1 08-09-2008 10:55 AM
Fridgidaire Washing Machine indyterry General Appliance Discussion 1 06-18-2008 06:50 AM
Washing Machine Query Daryl General Appliance Discussion 2 11-14-2006 08:59 AM