DIY Home Improvement, Remodeling & Repair Forum > Appliances > General Appliance Discussion > Printer





Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 12-20-2007, 10:17 AM  
mickmar
Junior Member
 
Join Date: Nov 2005
Posts: 21
Default Printer

I know this is not an appliance but don't know where else to post it. My old HP printer gave up yesterday so am looking for a new one. I don't want the 3 in 1 machine, just a printer. Which is a good one and why?
Mick



__________________
mickmar is offline  
 
Reply With Quote Quick reply to this message
Old 12-20-2007, 12:57 PM  
glennjanie
Senior Member
 
Join Date: Mar 2006
Posts: 2,992
Liked 2 Times on 2 Posts

Send a message via AIM to glennjanie
Default

Hello Mick:
I think a printer only will be hard to find, however I usually get the best deals at Best Buys.
Glenn



__________________
glennjanie is offline  
 
Reply With Quote Quick reply to this message
Old 12-20-2007, 03:32 PM  
ToolGuy
Senior Member
 
ToolGuy's Avatar
 
Join Date: Nov 2007
Posts: 482
Default

Micro Center or Circuit City here. I just check which has the features I want at the best price and the cost/availablity of the ink cartridges. I also avoid those with all the colors (RYB) in one cartridge, lest I'd have to buy them all to replace one.

__________________

[COLOR="DarkRed"][B]~ ToolGuy ~[/B][/COLOR]

[I]Save money on tools at [URL="http://mytoolbox.net"]MyToolbox.net[/URL]
[/I]

ToolGuy is offline  
 
Reply With Quote Quick reply to this message
Old 12-20-2007, 03:57 PM  
Hack
Senior Member
 
Hack's Avatar
 
Join Date: Nov 2007
Location: Petaluma, CA
Posts: 194
Default

Depends on what you need it for.

I had a color inkjet printer for a while, and it finally gave up. I don't need to print 81/2 X 11 in color, so I replaced it with an HP Laser Jet 1020. It's fast, and extremely reliable. I got it for just under $100.

__________________

Hack (a.k.a. Jeff)

Hack is offline  
 
Reply With Quote Quick reply to this message
Old 12-25-2007, 04:36 PM  
Rustedbird
Senior Member
 
Join Date: Oct 2006
Posts: 117
Default

Best would be black & white laser printer. The cost per page is pretty low. Doesn't have to be an HP. I've had a Brother 5040 for the last four years. Still going strong.

Ink jets are cheap to buy but the ink isn't. The cost per page can be high.A good compromise might be a B&W laser for mass production and an ink jet for occasional jobs.

__________________
Rustedbird is offline  
 
Reply With Quote Quick reply to this message
Old 12-26-2007, 03:37 PM  
booft
Junior Member
 
booft's Avatar
 
Join Date: Dec 2007
Posts: 19
Default

Right now Comp USA is going out of business all over, they are completly shutting down. You might very well find some good deals there. I have a an Epson CX5400, I got it a couple years back, but you can check their site if you need something like this (its a all in one type).

__________________

[url=http://www.learnhowtoplaster.com] Learn How To Plaster[/url]
Run By Plasterers For Plasterers
Time Served Spreads Ready To Help

booft is offline  
 
Reply With Quote Quick reply to this message
Old 03-05-2008, 09:33 AM  
DiyDave
Junior Member
 
Join Date: Mar 2008
Posts: 9
Default

If you are looking to print text documents and just plain everyday stuff I would reccomend HP again, If you are printing photos I would go for Canon.

__________________

My to do list: Knock down dividing wall, fix roof.

DiyDave is offline  
 
Reply With Quote Quick reply to this message
Old 03-05-2008, 11:43 AM  
travelover
Senior Member
 
Join Date: Aug 2007
Posts: 693
Liked 2 Times on 2 Posts

Default

I've had good luck buying stuff off Craigslist - lots of stuff new in box.


http://madison.craigslist.org/sys/

__________________
travelover is offline  
 
Reply With Quote Quick reply to this message
Old 06-25-2009, 11:50 AM  
design
Junior Member
 
Join Date: Jun 2009
Posts: 14
Default

I have a hp DeskJet 5655 which I got secondhand. It was owned by a graphic designer so I knew it was going to be able to print photos and stuff in color well. I've had no problems with it, and the ink is avg I guess. $30ish for color and $20 for black refills. I go through about 3-5 a year and I print quite a bit.

That's what you have to watch for- the ink. If you get a good deal on the printer but the ink is expensive, there goes your savings...



__________________
design is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Printer mickmar Electrical and Wiring 7 07-01-2008 01:29 PM
Floating Computer, printer, firewall and laptop shelf DIY mom Carpentry and Woodworking 4 04-04-2008 07:06 AM