DIY Home Improvement, Remodeling & Repair Forum

DIY Home Improvement, Remodeling & Repair Forum (http://www.houserepairtalk.com/forum.php)
-   General Appliance Discussion (http://www.houserepairtalk.com/f11/)
-   -   Range Top Works, Oven & Front Control Doesn't? (http://www.houserepairtalk.com/f11/range-top-works-oven-front-control-doesnt-11349/)

Mainah 05-15-2011 07:33 PM

Range Top Works, Oven & Front Control Doesn't?
 
Hey all, I'm hoping some of you can help. We've just moved into a new home with a Flat Top Fridgidaire Range that was manufactured in 2006. The complete range & oven worked when we went through our home inspection and when we moved in (yesterday). Now today, the range top works, however, neither the front control panel or the oven seems to be getting any power to it.

Any ideas as to whether this could be due to the appliance itself or the electrical connection? Perhaps some combination of the two?

Thanks in advance for any solid leads!

nealtw 05-16-2011 10:02 PM

Have you tried flipping the breakers?

inspectorD 05-17-2011 05:26 AM

Or
 
And if that does not work, it could be a loose electrical connection. If one leg of the 220 gets loose, you only get power to half the appliance.
Then you shut down the main breaker and tighten the lugs on the cuicut, or call an electrician.
And if that does not resolve the issue, call your appliance folks...it's broken.:welcome:

Mainah 05-17-2011 11:20 AM

Yup, tried the basics like flipping the breaker. We just had some electric work done to update the line into the house and consolidate two old panels. I'm thinking that perhaps this could have lead to the loose connection?

nealtw 05-17-2011 08:12 PM

Thats where I would start. Sometimes it can be the breaker.

audg 05-18-2011 02:40 PM

the glass top of the stove cracked with a small hole in it. it is on its side. Can i fixed it on my own?

Mainah 06-01-2011 04:25 PM

Thanks!
 
The info on checking the work done on the new panel definitely saved me some $! The connection for the range was not grounded correctly by the electrician initially...


All times are GMT -6. The time now is 06:37 AM.