DIY Home Improvement, Remodeling & Repair Forum

DIY Home Improvement, Remodeling & Repair Forum (http://www.houserepairtalk.com/forum.php)
-   General Appliance Discussion (http://www.houserepairtalk.com/f11/)
-   -   Replacing wall oven (http://www.houserepairtalk.com/f11/replacing-wall-oven-16481/)

Shawner 09-07-2013 07:35 AM

Replacing wall oven
 
Have an old GE 24" that was original to our home (around 30 years old), picked up a 27" GE off craigslist to replace it when it dies.

The new oven is shorter by about 2" than the original. Will I need to find some wood to stain and match the original cabinetry or do they make some sort of trim that'll work with the oven? (GE JCK680)

Thanks!

jeff1 09-07-2013 07:59 AM

Hi,

Quote:

Will I need to find some wood to stain and match the original cabinetry
Yes.

Quote:

or do they make some sort of trim that'll work with the oven?
Appliance manufactures do not.
Some places like this do...
http://microtrim.com/ovenring.htm

jeff.

nealtw 09-07-2013 09:44 PM

Check with your local sheet metal shop, see if they can make you something to match the oven, black or stainless?

Shawner 09-08-2013 07:51 AM

Black. After looking at that link, figure that I could probably use aluminum signs from work. Should be able to make it look nice but if it turns out junky, can always go another route after I guess.

nealtw 09-08-2013 08:34 AM

http://trimkits.com/other.php


All times are GMT -6. The time now is 04:07 PM.