DIY Home Improvement, Remodeling & Repair Forum > Appliances > General Appliance Discussion > Replacing wall oven




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 09-07-2013, 07:35 AM  
Shawner
Member
 
Join Date: Oct 2009
Location: Peachland, BC
Posts: 56
Liked 2 Times on 2 Posts
Likes Given: 4

Default Replacing wall oven

Have an old GE 24" that was original to our home (around 30 years old), picked up a 27" GE off craigslist to replace it when it dies.

The new oven is shorter by about 2" than the original. Will I need to find some wood to stain and match the original cabinetry or do they make some sort of trim that'll work with the oven? (GE JCK680)

Thanks!



__________________
Shawner is offline  
 
Reply With Quote Quick reply to this message
Old 09-07-2013, 07:59 AM  
jeff1
Contractor
 
jeff1's Avatar
 
Join Date: Mar 2006
Posts: 433
Liked 23 Times on 20 Posts
Likes Given: 1

Default

Hi,

Quote:
Will I need to find some wood to stain and match the original cabinetry
Yes.

Quote:
or do they make some sort of trim that'll work with the oven?
Appliance manufactures do not.
Some places like this do...
http://microtrim.com/ovenring.htm

jeff.


__________________

Appliance Repair Aid
http://www.applianceaid.com/

jeff1 is offline  
2
People Like This 
Reply With Quote Quick reply to this message
Old 09-07-2013, 09:44 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 9,337
Liked 731 Times on 652 Posts
Likes Given: 1281

Default

Check with your local sheet metal shop, see if they can make you something to match the oven, black or stainless?

__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Old 09-08-2013, 07:51 AM  
Shawner
Member
 
Join Date: Oct 2009
Location: Peachland, BC
Posts: 56
Liked 2 Times on 2 Posts
Likes Given: 4

Default

Black. After looking at that link, figure that I could probably use aluminum signs from work. Should be able to make it look nice but if it turns out junky, can always go another route after I guess.

__________________
Shawner is offline  
nealtw Likes This 
Reply With Quote Quick reply to this message
Old 09-08-2013, 08:34 AM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 9,337
Liked 731 Times on 652 Posts
Likes Given: 1281

Default

http://trimkits.com/other.php


__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Wall Oven Install - Pulling neutral from other circuit OakHaven Electrical and Wiring 4 09-02-2012 10:23 AM
brick wall oven installation? willowtree Bricks, Masonry and Concrete 2 04-12-2012 04:13 PM
Magic Chef Gas Wall Oven Steve68 General Appliance Discussion 0 07-15-2011 08:14 AM
painted wall oven door chirp General Appliance Discussion 4 06-25-2009 11:41 AM
Double wall oven Quattro General Appliance Discussion 6 03-07-2007 05:48 PM