DIY Home Improvement, Remodeling & Repair Forum

DIY Home Improvement, Remodeling & Repair Forum (http://www.houserepairtalk.com/forum.php)
-   General Appliance Discussion (http://www.houserepairtalk.com/f11/)
-   -   Washer/Dryer Pedestal (http://www.houserepairtalk.com/f11/washer-dryer-pedestal-14543/)

Griffithhouse 08-08-2012 01:04 PM

Washer/Dryer Pedestal
 
Hello,

My husband and I are having Whirlpool Duet washer and dryer delivered next week. We found a pair of pedestals for A LOT cheaper than reg price but not sure if they will cause issues, as the dimensions are not a 100% match.

Our W/D call for a pedestal that is: H: 15.5 x W: 27 x D: 26.25

The ones we are looking to buy are made for GE and are
H: 15 x W: 27 x D: 28.75

The height and width are fine but it would be sticking out in the back a bit (which I don't care about-as long as it fits). Does the washer/dryer need to snap into the pedestal or would it be ok?

Thanks!

jeff1 08-08-2012 08:46 PM

Hi,

The feet may not sit on the stands correctly...all you can do is measure the washer/dryer spacing between the legs ( L to R and back and forth ) and compare to the other stands.

Quote:

Does the washer/dryer need to snap into the pedestal
Most are bolted on or they use the legs to keep the units on the stands/pedestals.

jeff.


All times are GMT -6. The time now is 06:03 AM.