DIY Home Improvement, Remodeling & Repair Forum > Appliances > Refrigerators > hotpoint side by side issues




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 11-01-2010, 06:41 PM  
ESBROJON
Junior Member
 
Join Date: Nov 2010
Location: BOISE ID, ID
Posts: 1
Default hotpoint side by side issues

Recently the following issues have arisen with my Hotpoint side by side HSS25GFTA WW:

The fan seems to run excessively, I notice it mostly at night, and now the temperature in the freezer seems inconsistent. Occasionally I will open the freezer to water droplets forming underneath the ice drawer and on the food; more often I find frozen drops on everything. Until this summer I didn't have a build up of frost or ice in the refrigerator.
I was also concerned because the wall between the fridge and freezer is warm to the touch in the front, but the trouble shooting part of my user manual claims that is normal. Finally, the ice dispenser has decided that cubes are no longer acceptable and except for a rare instance will only dispense crushed ice. Go figure.



__________________
ESBROJON is offline  
 
Reply With Quote Quick reply to this message
Old 11-04-2010, 08:23 PM  
woodchuck
Senior Member
 
Join Date: Jul 2008
Location: Tuscaloosa, Al
Posts: 243
Liked 15 Times on 14 Posts

Default

The hot wall is usually caused by the condenser fan which is underneath around back. If it's not running when the compressor runs it will cause the problem you describe. You will need to remove the cardboard backing on the back of the fridge to access the fan.*This could also cause the temp problem.

You have a solenoid switch which switches the dispenser back and forth from crushed to cube. With crushed being the the default and cube when the solenoid is activated. It could be stuck or not working or the parts connecting it could be disconnected or broken. You will have to observe to see if any parts are moving and if any noise is coming from the solenoid
Remove the dispenser cover by gently prying starting at the bottom going round and round a little at a time to prevent from breaking it. When it's off the screws will be exposed to access the other components.

__________________
woodchuck is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Don't lay water heater on side? TxBuilder General Appliance Discussion 13 10-29-2012 10:40 AM
Kenmore Side X Side not working wmtelsr1 Refrigerators 5 08-02-2010 07:30 AM
house side door chauncey12 Carpentry and Woodworking 2 11-08-2008 07:14 PM
side by side window does not fit maggiesilver70 Windows and Doors 4 09-08-2008 12:43 PM
Side by Side Floors - Cherry and Hickory austinbirdman Flooring 2 03-09-2008 06:13 PM