DIY Home Improvement, Remodeling & Repair Forum > Appliances > Refrigerators > Kenmore Refrig- Model 79576204901; Freezer on bottom-NOT WORKING -




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 08-25-2013, 06:21 PM  
kev
Junior Member
 
Join Date: Aug 2013
Posts: 3
Likes Given: 2

Default Kenmore Refrig- Model 79576204901; Freezer on bottom-NOT WORKING -

i Have a Kenmore frig model 79576204901 thats 2 yrs new, frezzer on bottom, frig on top.
It has worked fine since new, suddenly today , the digital temp indicator shows ERR instead of temperatur and the freezer digital shows FF. '
If I unplug it , and then plug in again, . it comes back on, but quickly dies out again.. this sounds like a electronic CB problem ..... but i could be wrong

i have had trouble with GE Profile refirg with a Bad main circuit board..... saw an article in this forum which was correct and i fixed it myself. there was even a GE recall that wAS issued to repair techs but not the public, Thanks to you guys , i clicked on it and was infomred when i spoke to a GE repair tech . They wanted 120 for it but since i was aware of the recall i got it for free.

If anyone has any info about KENMORE frigs that stop working ... please,... HELP ME !!

thank you ... this is a great blog...>!



__________________
kev is offline  
 
Reply With Quote Quick reply to this message
Old 08-27-2013, 04:37 PM  
WindowsonWashington
Junior Member
 
WindowsonWashington's Avatar
 
Join Date: May 2013
Location: Washington, DC, Virginia
Posts: 198
Liked 19 Times on 18 Posts
Likes Given: 28

Default

Kev,

We have a couple of really good techs on the site so I will wait for them to post up but in my very uneducated opinion, it sounds like an electronics/board issue.



__________________
WindowsonWashington is offline  
 
Reply With Quote Quick reply to this message
Old 08-27-2013, 09:10 PM  
jeff1
Contractor
 
jeff1's Avatar
 
Join Date: Mar 2006
Posts: 433
Liked 24 Times on 21 Posts
Likes Given: 1

Default

Hi,

I am not overly familier with the LG built Kenmores but this may be close enough to help...
http://www.applianceaid.com/pdf/Kenmore-LG-refrigerator-795.76202901-SM-MFL62078224.pdf

jeff.

__________________

Appliance Repair Aid
http://www.applianceaid.com/

jeff1 is offline  
 
Reply With Quote Quick reply to this message
Old 08-28-2013, 10:21 AM  
woodchuck
Senior Member
 
Join Date: Jul 2008
Location: Tuscaloosa, Al
Posts: 244
Liked 16 Times on 15 Posts

Default

This error code Er FF indicates a problem with the evaporator fan motor but it can also be with the main control board. When the power cord is disconnected for 30 seconds and then reconnected, it resets the board. Sometimes this procedure corrects the problem and sometimes it does, for only a short period of time. Usually in this case, the main board will need to be replaced. First it needs to be determined if the fan motor is running or not. If the motor is still running, the main board, which is located behind the unit, will probably need to be replaced. It's possible the motor may not be sending a low voltage signal to the board. If the motor is not running, some voltage checks will need to be made to, determine if the motor has failed or if the board is not sending voltage to the motor. These are some difficult checks to make and the motor can be a difficult repair, which will require a technician.

__________________
woodchuck is offline  
kev Likes This 
Reply With Quote Quick reply to this message
Old 09-18-2013, 12:06 PM  
kev
Junior Member
 
Join Date: Aug 2013
Posts: 3
Likes Given: 2

Default Old School!: GE Frig Model No. TBF-18 B- blows a breaker when turned on

HI

I have a unique situation here, maybe its happened before:

i have a "Old school " GE traditional frig from the 70"s that is a great collector for "retro" lovers. Its copper colored and beautiful . The freezer is on top - frig on bottom . 17.6 Cu Ft

the problem is , when its plugged in , the lights work and its fine. BUt when you turn the dial to start it , , it blows a breaker and shorts out. !!
it has been sitting idle for 8 months and is used only 4 months a year. Its a 1970's vintage model so it well made and i dont want to trash it to a land fill.
please advise , or send links where i can get a service manual and to diagnose the problem

thank you,, this is a great site ! u just helped me fix a new Kenmore , freezer on bottom that was givikng a ERR FF code !

__________________
kev is offline  
 
Reply With Quote Quick reply to this message
Old 09-18-2013, 09:11 PM  
woodchuck
Senior Member
 
Join Date: Jul 2008
Location: Tuscaloosa, Al
Posts: 244
Liked 16 Times on 15 Posts

Default

Your compressor starter or the compressor is bad. Look near the compressor for a small black plastic part. Maybe an inch big. Take it off and shake it. If it rattles its bad. If it's melted it's bad. probably compressor it it seems good.

__________________
woodchuck is offline  
 
Reply With Quote Quick reply to this message
Old 09-18-2013, 09:26 PM  
jeff1
Contractor
 
jeff1's Avatar
 
Join Date: Mar 2006
Posts: 433
Liked 24 Times on 21 Posts
Likes Given: 1

Default

Hi,

Quote:
BUt when you turn the dial to start it , , it blows a breaker and shorts out. !!
Compressor winding shorted to ground is common...

Check for grounded windings by reading from each terminal to a good ground on the cabinet.



jeff.
__________________

Appliance Repair Aid
http://www.applianceaid.com/

jeff1 is offline  
 
Reply With Quote Quick reply to this message
Old 09-19-2013, 02:09 PM  
kev
Junior Member
 
Join Date: Aug 2013
Posts: 3
Likes Given: 2

Default

hi Jeff

thank you for repsonding to this rather starnge qustion im sure.

exactly how do i perfomrthis test? Is this a capacitor that is unplugged from the compressor..?? where is it located and to check the continuity , do i test each of these terminal to the frame of the frig...and what am i checking for ... open ciruit or infinity or closed and shorted circuit from each of the test areas on the compressor. MOre details th ebetter ..
Im a mechanical engineer by traiing not an electrical engineer type !!!

thank you , Kevin

__________________
kev is offline  
 
Reply With Quote Quick reply to this message
Old 09-19-2013, 08:27 PM  
jeff1
Contractor
 
jeff1's Avatar
 
Join Date: Mar 2006
Posts: 433
Liked 24 Times on 21 Posts
Likes Given: 1

Default

Quote:
Check for grounded windings by reading from each terminal to a good ground on the cabinet.
Remove start relay and overload so the compressor pins look like the pic above....then test each pin to ground/cabinet for continuity.

jeff.


__________________

Appliance Repair Aid
http://www.applianceaid.com/

jeff1 is offline  
kev Likes This 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Kenmore Front Load Dryer Model 97078712 Will Not Start 06Honda General Appliance Discussion 2 05-06-2012 07:34 AM
Kenmore Upright Freezer jgilpin General Appliance Discussion 5 06-10-2011 10:53 AM
GE Bottom Freezer Fridge is HOT crcox Refrigerators 0 08-14-2010 04:25 PM
Buying a Kenmore refrigerator model # CYE3422AZW series 421 24336D General Appliance Discussion 3 10-14-2009 01:17 PM
GE Bottom Freezer Refrigerator not cooling jayz1976 General Appliance Discussion 1 08-13-2009 06:26 PM