I am trying to determine best way to fix the buckling problem on floating clicklock laminate floors in our lower level. Few months ago, we noticed few spots buckling up and thought it may have been due to a faulty installation (i.e. not leaving enough expansion gap). We removed the click lock in one room and notice that there is moisture on the underlayment padding, moisture barrier and also on parts of the plywood subloor. The plywood has become warped (elevated) in some areas.
We did have a leak from the water line to the fridge few months back which I'm thinking might have introduced moisture to the sublfoor. The plywood is nailed to the concrete slab foundation of the house (no joists).
Few questions I have are:
1) The plywood has moisture but doesn't seem totally damaged and I'm wondering if I need to pull out the plywood and replace it or can I let it dry out? If I can keep the plywood, should I sand down the warped areas?
2) I was thinking of removing the plywood and installing ceramic tiles (or even vinyl tiles as I've heard these are better for moisture prone areas) but seems like removing the plywood will be the most difficult job since it looks to be nailed down to the concrete slab. Any suggestions on removing the plywood?
3) Could mopping this type of click lock flooring cause moisture problems? Whats the best way to clean?
Thanks in advance for any responses.