DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Flooring > Old Farmhouse Wood Floor




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 02-24-2010, 09:31 AM  
Navyfly73
Junior Member
 
Join Date: Feb 2010
Posts: 1
Default Old Farmhouse Wood Floor

Hi.

I'm purchasing an old farmhouse built in 1900-1910. The foundation is old sandstone, and you can see the wood flooring from beneath between the joists (no sublfloor). I know these old houses are built with the wood floors (no subfloor). The flooring under the carpet is painted and looks to be about 4 inces wide or so. I'm wondering if it is finishable hardwood- whether I can sand it and make it nice or if it is not "that type" of flooring. How can I tell if it is finishable?



__________________
Navyfly73 is offline  
 
Reply With Quote Quick reply to this message
Old 02-26-2010, 11:54 AM  
Bud Cline
Tile Contractor
 
Join Date: Apr 2006
Posts: 284
Default

Quote:
How can I tell if it is finishable?
Pick a room and go for it. If it isn't "finishable" you'll find that out fairly quick.

I don't know how anyone on the Internet can answer a question like that sight unseen.


__________________

[SIZE="1"][B][COLOR="Blue"][CENTER]Some days I aspire to becoming a missing person.[/CENTER][/COLOR][/B][/SIZE]

Bud Cline is offline  
 
Reply With Quote Quick reply to this message
Old 02-26-2010, 03:49 PM  
Nestor_Kelebay
Emperor Penguin
 
Nestor_Kelebay's Avatar
 
Join Date: Mar 2009
Location: Winnipeg, Manitoba
Posts: 1,844
Liked 2 Times on 2 Posts

Default

Navyfly73:

Well, what you should do is take a good look at the underside of those boards. Hardwoods all come from "deciduous" trees, which are the ones that drop their leaves in the fall. The softwoods come from "coniferous" trees that have needles instead of leaves. (And, as you might expect, there are always exceptions to every classification; balsa wood trees drop their leaves and are therefore considered a hardwood, but balsa is the softest wood you can find. Also, the Larch tree has needles instead of leaves, but it drops it's needles every fall.)

One important difference, however, is that deciduous trees (the hardwoods) generally will have a trunk that doesn't have branches growing out of it. You'll have a relatively straight trunk with no branches until you get to the crown, and that's when all the branching suddenly happens. Softwoods are different in that respect. They will have more branches growing out of the trunk. Softwood generally grow straight, and that makes them great for making into lumber, but the lumber you get will typically have lotsa knots. You have to have "old growth" fir or spruce trees to get away from the knots that typically show up in younger trees.

So, do a knot survey on the underside of your wood, and the more knots you see, the better the liklihood that the wood you've got is one of the harder softwoods like fir or pine.

Back then, typically they would use a hardwood for the floor on the main floor (where they entertained guests) and if they wanted to save money, they'd use a harder softwood for the upper floors where the bedrooms were and people walked mostly in stockings or bare feet. So, if your house has an upper floor, and you find hardwood on the floors up there, then they definitely would have used hardwood on the main floor which their guests all see.

Finally, if I wuz you, I would strip off the carpet and any floor paint on the wood. In the 1900's there simply were no paints that would provide the kind of hardness that we can get now from polyurethane floor paints or polyurethane hardwood floor finishes. Back then, people had bare wood floors in their farm houses, and they weren't intended to be elegant. You'll uncover a lot of history, including the liklihood that the boards will be a little worn on top from decades of cleaning with a stiff scrub brush and sweeping with a corn broom.

I see absolutely nothing wrong with leaving a wood floor like that alone and using it just the way it is once you get the paint off. It will even be an interesting conversation piece since you rarely see the rustic wood floors that people had 100 years ago anymore.

I'd be kinda leery about refinishing it even if it is hardwood because with no subfloor, all the strength of your floor is coming from that wood. Sanding the wood down to refinish is going to make it thinner and weaker, and perhaps you need that strength more than you need a better looking floor.

__________________
Nestor_Kelebay is offline  
 
Reply With Quote Quick reply to this message
Old 02-27-2010, 10:06 AM  
Bud Cline
Tile Contractor
 
Join Date: Apr 2006
Posts: 284
Default

Probably the best way to identify the wood used in this structure is to look out one of the windows and see what species of tree is on site or nearby. That's likely the wood that was used on your floor 100 years ago. Back in those days a lot of the wood used in construction was all local and in close proximity to the build site if not from the build site.

__________________

[SIZE="1"][B][COLOR="Blue"][CENTER]Some days I aspire to becoming a missing person.[/CENTER][/COLOR][/B][/SIZE]

Bud Cline is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Purchasing old DIY farmhouse-what to look for? kwmainer General Home Improvement Discussion 2 08-15-2009 07:32 PM
Wood Floor Color? rwalker28 Flooring 4 02-18-2009 07:18 AM
Help- Wood floor with pet stains keep343er Flooring 2 09-28-2007 10:13 AM
Old Farmhouse in Red Oak TX Phil Randazzo Introductions 1 03-21-2007 12:07 PM
Wood floor issue AmyH Flooring 1 02-16-2007 11:49 AM