DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Flooring > Outdoor, Non-Slip Tile




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 01-02-2008, 10:38 AM  
CraigFL
Senior Member
 
Join Date: Mar 2006
Posts: 409
Default Outdoor, Non-Slip Tile

Is there a reason I can't find this easily? It seems that searching on this at tile makers and distributors doen't come up with matches. If you look in the fine print of some tile specifications, it will say it's suitable for outdoor use but that's about it. I would like a tile that has a prominent, non-smmoth, textured surface that won't be very slippery when it's wet. I have an outdoor, front entry way that seems to get condensation when the weather changes a bit and right now becomes a skating rink...



__________________
CraigFL is offline  
 
Reply With Quote Quick reply to this message
Old 01-03-2008, 05:54 AM  
inspectorD
Housebroken
HRT_MODERATOR.png
 
inspectorD's Avatar
 
Join Date: Dec 2005
Location: Litchfield, CT
Posts: 4,075
Liked 123 Times on 103 Posts
Likes Given: 301

Default Brrr

A skating rink outside...in Florida?
You should be rich!!!
Looks like you need to get aquainted with the local tile store.
We don't use tile outdoors up here because it just will not last outdoors. In your area this may be a common issue and talking to the locals will help.
Sorry Craig but every once and a while you may need to get out.Hehe...



__________________

Just My
Made in the

inspectorD is offline  
 
Reply With Quote Quick reply to this message
Old 01-03-2008, 06:20 AM  
phreaq
Member
 
Join Date: Sep 2007
Posts: 66
Default

I was watching HGTV the other day, and they were putting tiles outside. The homeowner inquired about slippage, and the host talked about two key things.

1. The tile they were looking at had some sort of gritty surface that they could feel when they ran their hand over it (my TV did not allow me to feel it myself )

2. The host mentioned they were going to use smaller tiles than normal, with a wider grout than normal. This way, more grout was exposed, which is what they were hoping would provide more grip.

So it may be a matter of the tile and the installation of it.

__________________
phreaq is offline  
 
Reply With Quote Quick reply to this message
Old 01-07-2008, 09:15 PM  
Dave Gobis
Dave Gobis
 
Join Date: Mar 2006
Posts: 2
Default

There is tile under ice and snow all over WI were I live and other Northern tier states. Plenty of them over a 100 years old in downtown areas. It is a matter of proper selection and installation.

For slip resistance the tile term used is abrasive or something with a high COF. Static Coefficient of Friction (or SCOF) is a test for tile to be used on a walking surface and is tested by dragging a 50 lb. weighted sled over the surface of the tile and measuring the force required to just start the sled moving. A Neolite test pad is used as a standard friction surface. The SCOF is determined by dividing the force required to just start moving the weight by the 50-lb. test weight. For example, if 25 lbs. of force is required to just start the sled moving, then 25/50 is 0.5 and the SCOF is 0.5. The guideline that is generally accepted in the U.S. is that the SCOF should be at least 0.6 on a flat, dry surface. The higher the number, the greater the resistance. Nearly all manufactures have these numbers available.

__________________

David M. Gobis
Executive Director
Ceramic Tile Education Foundation
[url]www.tileusa.com[/url]

Dave Gobis is offline  
 
Reply With Quote Quick reply to this message
Old 01-07-2008, 11:45 PM  
ToolGuy
Senior Member
 
ToolGuy's Avatar
 
Join Date: Nov 2007
Posts: 482
Default

Just my nickel's worth, but have you checked for tile suitable for around a pool? I don't know if there's a specific type that's used, but I do know lot's of swimming pools have tile around them, so must be somewhat slip resistant.

Also, look into commercial tile. Plenty of shopping centers and such have tile entryways which, at least for liablitiy purposes, should provide some sort of traction.

Just my thoughts.

__________________

[COLOR="DarkRed"][B]~ ToolGuy ~[/B][/COLOR]

[I]Save money on tools at [URL="http://mytoolbox.net"]MyToolbox.net[/URL]
[/I]

ToolGuy is offline  
 
Reply With Quote Quick reply to this message
Old 06-29-2009, 02:42 PM  
jimmy50
Member
 
jimmy50's Avatar
 
Join Date: May 2009
Posts: 38
Default

I Know just what you need ! I have been looking around my self to find out what I can do to fix my slippery tile in my garage floor. I just bought some stuff called Johnny Grip it's only been about a week, but so far I love it.
I know before I fixed the tile my wife slipped and almost broke her hip.
As dangerous as the world is today thats the last thing we need is people getting hurt from wet tile.
This is the site it got it from www.slipperytile.com

__________________
jimmy50 is offline  
 
Reply With Quote Quick reply to this message
Old 06-29-2009, 10:53 PM  
Nestor_Kelebay
Emperor Penguin
 
Nestor_Kelebay's Avatar
 
Join Date: Mar 2009
Location: Winnipeg, Manitoba
Posts: 1,844
Liked 2 Times on 2 Posts

Default

Does it have to be ceramic tile?

The Johnsonite Company is (so far as I know), the largest manufacturer of synthetic rubber flooring in North America and probably the whole world. They make all kinds of both conventional and specialty rubber flooring (such as oil resistant flooring, non-slip, anti-static, shock absorbing, cut and puncture resistant, etc.).

Johnsonite makes a synthetic rubber floor tile called "Safe-T-Stride" specifically for areas where the floors can often be wet, such as in meat rendering plants or around swimming pools. They also make a sheet vinyl type material called "Safe-T Sheet" that comes with optional aluminum granules embedded in it (like raisins in raisin bread) that provide a highly non-slip surface to walk on.


Close-up of Safe-T-Stride synthetic rubber floor tiles.


Safe-T-Stride synthetic rubber floor tiles installed around an indoor pool.

In the picture above, the rubber flooring looks like hard plastic, but in reality it resembles car tire rubber more than anything else (except in colour). I have Johnsonite synthetic rubber stair treads in both the front and back stairwells of my building. I've found it to be a super durable material. You can put a lit cigarette out on it without harming it. If you do that, you will end up with a black mark on the rubber, but that mark can be easily removed with a bit of paint thinner. You cannot damage this flooring unintentionally. You can only damage it intentionally with a torch or razor. I don't know of any chemical that will harm it.

If you're interested in using synthetic rubber flooring instead of ceramic tiles, you can contact Johnsonite at 1-800-899-8916.

__________________

Last edited by Nestor_Kelebay; 06-30-2009 at 04:46 AM.
Nestor_Kelebay is offline  
 
Reply With Quote Quick reply to this message
Old 09-01-2009, 12:40 AM  
spec_j
Member
 
spec_j's Avatar
 
Join Date: Aug 2009
Posts: 53
Default

Quote:
Originally Posted by ToolGuy View Post
Just my nickel's worth, but have you checked for tile suitable for around a pool? I don't know if there's a specific type that's used, but I do know lot's of swimming pools have tile around them, so must be somewhat slip resistant.
+1 on this one. A friend did this on his porch and it looks great. His kids have no worries when going from the pool to the porch and back with soaked clothes and wet feet.


__________________
spec_j is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
How to install tile edging after tile is installed bwbelle Flooring 1 11-13-2011 01:33 PM
Shower/tub tile repair advice bootpdx General Home Improvement Discussion 3 12-23-2008 01:02 PM
tile to glass block window transition derekm Flooring 3 06-24-2008 09:58 PM
Tile over tile hubbyandme General Home Improvement Discussion 6 10-09-2006 05:31 PM
will vinyl tile stick over ceramic ruby Flooring 1 10-10-2005 08:20 PM