DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Flooring > paint




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 06-26-2008, 09:55 AM  
goldnapl5k
Junior Member
 
Join Date: Jun 2008
Posts: 1
Default paint

I want to know if I can paint interior latex satin over semi gloss enamel or do I have to prime the walls and trim first? I am very new here and wanted to get good advice before I make a big mess again. Thanks for the help.



__________________
goldnapl5k is offline  
 
Reply With Quote Quick reply to this message
Old 06-26-2008, 11:49 AM  
Quattro
Massive Tool Belt
 
Join Date: Oct 2006
Posts: 262
Default

Welcome to the forum! This is a great place for advice.

The only issue with latex over an enamel (old tyme "oil base") is adhesion. For the best possible results, prime with a high quality primer/sealer like Zinsser 123. If the surface is really glossy, you may need a shellacking primer (such as Zinsser B-I-N), which must be used with good ventilation. If this is for kitchen cabinets, you really ought to consider this type of primer. Or, for other painted surfaces that get touched a lot.

With a good primer base, any latex top coat is going to look better, stick better, and last much longer. It's worth it to spend the money and time to do it right the first time.

Good luck!



__________________
Quattro is offline  
 
Reply With Quote Quick reply to this message
Old 06-26-2008, 11:53 AM  
Quattro
Massive Tool Belt
 
Join Date: Oct 2006
Posts: 262
Default

Ah, I just read that this is for walls and trim!

Well, at the very least, scrub/wash the walls and trim to remove grease/fingerprints/etc. TSP is good for this, or there are a number of concentrated wall cleaners at the hardware store.

If the existing paint is in good condition, priming may not be necessary if the paint you're putting on is high quality. Otherwise, I would recommend a water-based primer first. Especially if you are going from a darker color to a lighter color. Some primers are tintable as well. This helps if you are going much darker than the existing color.

Good luck!

__________________
Quattro is offline  
 
Reply With Quote Quick reply to this message
Old 06-27-2008, 11:47 AM  
handyguys
Senior Member
 
handyguys's Avatar
 
Join Date: Feb 2008
Location: USA
Posts: 815
Liked 1 Times on 1 Posts

Send a message via Skype™ to handyguys
Default

The trim I would just lightly sand to knock down the gloss, clean well and paint. For the walls if the colors were similar I would just paint with a GOOD quality paint. If there was a dramatic change from dark to light I would prime first. Going light to dark I wouldn't bother priming. Benjamin Moore paint is the one I have had best results with Behr I have had nothing but bad results with.

__________________

The Handyguys Podcast [url]http://www.handyguyspodcast.com[/url]

handyguys is offline  
 
Reply With Quote Quick reply to this message
Old 06-28-2008, 08:36 AM  
Daryl in Nanoose
Senior Member
 
Daryl in Nanoose's Avatar
 
Join Date: Feb 2006
Location: Nanoose Bay, BC
Posts: 762
Liked 3 Times on 3 Posts
Likes Given: 5

Default

Anytime I come across this I always do the following
First I clean all the surfaces with TSP and well rince, I then sand the surfaces with 150 grit sandpaper to take the gloss off and this also roughs up the surface to accept primer, then I clean all the dust off.
Now I prime with Ben moore Fresh Start, then lightly sand with 180 grit, clean off the dust and apply 2 coats of Paint.



__________________

[url]http://edhome.shawwebspace.ca/[/url]

Daryl in Nanoose is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Lead paint on windows cinder Painting Forum 13 05-28-2009 01:44 PM
New paint bubbled... TaskBoy Decorating and Design 2 07-09-2008 02:00 AM
can i paint a formica countertop alicemagooey Decorating and Design 8 01-30-2008 04:39 PM
How to remove paint from brick beezee3 Bricks, Masonry and Concrete 5 10-01-2006 07:07 AM
Vinly Paint - PolymatrX - Siding Classic2 Roofing and Siding 12 08-11-2006 12:44 PM