DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Flooring > peel and stick vinyl tile




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 02-12-2009, 02:51 PM  
remodelingdiva
Junior Member
 
Join Date: Oct 2007
Posts: 6
Default peel and stick vinyl tile

Hello- we currently have sheet vinyl flooring in our kitchen and want to do the peel and stick tile. I am worried about it peeling up and not looking nice after a while...i am hoping for few years worth not 10/20 or anythig crazy like that. cannot do ceramic tile (i know that would be a better choice) so please do not suggest. We want to do it ouselves so we want to lay it over existing one (good condition just ugly loooking). I have been doing some research and from what i have gathered it is good to sand cuurent floor so it binds better and also floor grout/caulk (not sure which is best) in between, and it was 50/50 on using extra adhesive. Need some advice...Thanks!



__________________
remodelingdiva is offline  
 
Reply With Quote Quick reply to this message
Old 02-12-2009, 08:17 PM  
glennjanie
Senior Member
 
Join Date: Mar 2006
Posts: 2,990
Liked 2 Times on 2 Posts

Send a message via AIM to glennjanie
Default

Hello RemodelingDiva:
Sorry, I have never seen an acceptable tile job with 'peel and stick'. First you have a joint on all four sides of every tile. Second the tile will go pretty fast down the middle of the room, but the trim in pieces will take longer to cut and lay than the field.
I recommend new sheet vinyl laid over the old. It will telegraph the lines in the present floor but it has heavy embossing to help conceal those imperfections. You can lay the whole sheet out and orient it with your room, put some weight on one half of the sheet to prevent moving around, fold the other half back over the weighted half and spread cement on the bare floor, slowly move the folded part back onto the cement while rubbing bubbles out of the contact area with a towell, cut off the large waste pieces, press the edges with a wood block, trim the rest of the waste off very carefully, repeat with the weighted half and be sure to put base shoe or metal trim (in doorways) around the perimeter to keep the vinyl from drying out and curling up. Believe me, it is much easier and it gives you a seamless floor.
Glenn

__________________
glennjanie is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On