DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Flooring > Porch Flooring




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 07-16-2009, 04:14 PM  
hydrogeo99
Junior Member
 
Join Date: Jul 2009
Posts: 1
Default Porch Flooring

Hi,
We are going to make some "improvements" to our screened porch. The flooring of the porch was originally just a deck, made with 5/8" x 6" pressure treated pine. When the previous converted the deck to a covered screened-in porch, they covered the deck boards with plywood (3/4" sheathing). They thoroughly attached the plywood to the deck boards with exterior drywall type screws...probably over-did it...and caulked all the edges. They then glued down a green "astroturf" type polypropylene (?) carpeting over the plywood. Despite getting some weather coming in near the edges of the porch, the plywood is still very sound...no signs of rot. We have removed the astroturf and there is some glue residue left on the plywood. I was going to rip up the plywood and put down (perpendicular to the decking) either new PT decking or T&G pine on top of the old stuff...either of these would be painted with porch paint. Yesterday, I was in my local big box home improvement store and there is a cement-based siding product made by James Hardie that caught my eye. It's relatively thin (about 1/4"), but started to wonder about its possible use for flooring. If I left the plywood in place, sanded it down to remove the glue residue, and then laid the siding product over the plywood, setting it in some outdoor rated thinset mortar, would it last or even be worth the effort? I'm sure this type of use does not fall into what the James Hardie Corp would recommend or even consider a valid use for their product, but it certainly seems workable. What do ya'll think? Any opinions or similar applications would be appreciated.



__________________
hydrogeo99 is offline  
 
Reply With Quote Quick reply to this message
Old 07-17-2009, 06:42 PM  
Nestor_Kelebay
Emperor Penguin
 
Nestor_Kelebay's Avatar
 
Join Date: Mar 2009
Location: Winnipeg, Manitoba
Posts: 1,844
Liked 2 Times on 2 Posts

Default

If it's made to be a siding for buildings, then it's probably not strong or hard enough to be used as a flooring. I'd be concerned that it would crack up from people walking on it, or that it would wear out quickly in the high traffic areas in front of the porch door.

I think the polypropylene carpet wasn't a bad idea, but a better idea would have been a decent quality Olefin carpet (which is much more attractive than polypropylene, but chemically very similar). If your polypropylene carpet has stood up well for you, then I expect a 100% Olefin carpet will stand up equally well. However, instead of gluing the Olefin carpet down, I'd install it the same way they installed carpets many years ago; by nailing them down around their perimeter with carpet tacks. That would make removing the carpet much easier in future.

__________________
Nestor_Kelebay is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
sinking porch? moonwards Framing and Foundation 5 04-23-2009 03:05 PM
porch repair help? catart58 Introductions 3 10-20-2007 02:51 PM
Saggy Porch taxona General Home Improvement Discussion 4 05-24-2007 05:29 PM
roof on the porch janice likens Introductions 1 05-10-2007 06:57 PM
Front porch khvanar Introductions 2 03-13-2007 09:01 AM