DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Flooring > Resurfacing stair treads now covered with carpet. What options are available?




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 08-03-2009, 06:43 PM  
ranpan2009
Junior Member
 
Join Date: Aug 2009
Posts: 1
Default Resurfacing stair treads now covered with carpet. What options are available?

My stair treads are now covered with carpet which is quite old and dirty. I want to remove the carpet, but in so doing the wood below will expose and I get to find some way to resurface it. I cannot afford hardwood since it is too expensive. I don't like laminate floor as well since it will be slippery. What other alternatives are available? Is is practical to just paint the treads up and what kind of paint should I use? Thanks!



__________________
ranpan2009 is offline  
 
Reply With Quote Quick reply to this message
Old 08-03-2009, 09:22 PM  
Nestor_Kelebay
Emperor Penguin
 
Nestor_Kelebay's Avatar
 
Join Date: Mar 2009
Location: Winnipeg, Manitoba
Posts: 1,844
Liked 2 Times on 2 Posts

Default

Well, you COULD clean off the old carpet adhesive (if the carpet is glued down) and just paint the steps. That would be the least expensive treatment, but would probably look kinda rough tho. If you were to do that, you'd want to use an oil based paint that dried to a very hard film, like a pre-tinted alkyd or polyurethane FLOOR paint. If you can't find a floor paint in a colour you like, you could opt to use an alkyd wall paint, but it simply won't stand up as well as a floor paint because it will dry to a softer film. The softer the film, the sooner it will show wear, and the more easily damaged it will be.

Basically, you can put ANY kind of flooring on your steps. They sell stair treads in metal for ceramic tiled concrete steps, you can remove the old carpet and put in new carpet. Or, you can install vinyl or rubber stair nosings, and then put a wide variety of floorings on the stair treads themselves.

For example, take a look at the vinyl stair nosing from Johnsonite in this picture on the left:



Johnsonite Old > Finishes & Accessories > Stairwell Management > Nosings

The nosing gets glued down to the stair tread with a suitable flooring adhesive. There is a short lip 1/4 of an inch long on the nosing in which you can slip a vinyl, rubber or vinyl composition floor tile cut to fit the depth of the step. As long as the flooring is 1/8 of an inch thick, the cut edge of the flooring will slip under the lip of the stair tread to provide an attractive appearance. A thick (and therefore strong) real linoleum (like Marmoleum) would fit in that 1/8 inch slot as well.

You can get similar vinyl stair tread nosings with a 1/4 inch wide slot in them so that carpeting can be glued down to the treads and the cut edge hidden under a lip on the stair tread nosing.

The stair nosing on the right has a similar feature, but it's made from synthetic rubber rather than vinyl. Both will give you an attractive stair case, but in a house, you really don't need the durability of synthetic rubber. The flooring you put on the steps will wear out long before even the vinyl nosings do. Installing synthetic rubber stair tread moldings would be a waste of money because you'd be pulling off the flooring long before the stair nosings were near the end of their life.

Johnsonite is the biggest name in vinyl and rubber flooring and flooring accessories, but they're not the only ones making such products. Roppe and Bengard also make vinyl flooring accessories like stair nosings.

__________________

Last edited by Nestor_Kelebay; 08-03-2009 at 09:37 PM.
Nestor_Kelebay is offline  
 
Reply With Quote Quick reply to this message
Old 02-02-2010, 08:44 PM  
barrycarlton
linomaster
 
Join Date: Feb 2010
Location: Boise Idaho
Posts: 4
Default

I would imagine that you have this resolved already, but if not, and even if so this is a good reference for stair nosings for use with Marmoleum.

Note the picture of the 'scribe to' stair nosing. It is a clean look, and a somewhat retro look.

work-089.jpg   work-090.jpg   work-160-finished-concrete-stairs-marmo-2.jpg   work-158-finished-concrete-stairs-marmo-1.jpg  
__________________

[URL="http://www.linomaster.com/"]http://www.linomaster.com/[/URL]

barrycarlton is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Oak stair treads safety concern. kcdel500 Flooring 6 02-28-2009 03:30 PM
Covered register with Hardwood floor 89Buckeye General Home Improvement Discussion 4 11-16-2008 05:00 PM
Enclosed/Covered Porch Dilemma crapbathroom General Home Improvement Discussion 1 07-05-2008 08:44 AM
Resurfacing Concrete/cinder block walls kayokayo Flooring 4 04-11-2008 11:16 PM
question on resurfacing brick basement walls barleypopmaker Bricks, Masonry and Concrete 6 01-02-2008 05:15 PM