DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Decks & Patios > Instructions for building single decks





Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 09-09-2010, 03:38 AM  
imported_Steve
Junior Member
 
Join Date: Sep 2010
Posts: 6
Default Instructions for building single decks

First of all visualize exactly how you want the deck to function. Depending on this plan how everything will fit together.
Deciding on which direction the deck building boards will run i.e. parallel to the house or perpendicular is important because both has its own advantages and disadvantages. However, it is always better to have the post at the edge since this gives the railing best support. Also it is better to have the deck not attached to the house as water may find its way in.
Next, dig holes at least two feet deep where the support post will be located. These posts can be placed in concrete instead of using bolts and hangers. Then attach the joist to the header joist using joist hangers or use nails through the header joist into the end of the joist. An important point to note at this stage of deck building process is that every joist is the correct length so that any trimming is not required during attachment at the other end. Attach the other end of the joist to have the basic frame in place and the post to hold the railings.

To place the stair stringer for the steps the stringers should be placed in a way to allow a 36 inches wide stair. Nail from the backside into the stringer or use joist hangers to support the stringers and support the bottom edge on concrete if possible. After the stringers are in place, place the steps one by one.

After this attach the deck boards to the floor joist starting at the outside and working toward the house. Before nailing them down look at the edge. The grain should run concave or down on the edges to prevent water logging. Finally place the railings one by one. Then take some long smooth deck boards and place on top of the post and the railings and nail into place.

The deck is useable now. You can install some skirting around the bottom of the deck to give them a great look.



__________________

[URL="http://www.outbackdeck.net/"]Deck Builder[/URL]

imported_Steve is offline  
 
Reply With Quote Quick reply to this message
Old 09-12-2010, 10:06 AM  
wannabedecker
Junior Member
 
Join Date: Sep 2010
Posts: 1
Default hi

this looks like a good start for a newbie like me.
Before I embark, I would appreciate it if you tell me a few more ideas about:
1. What are the set of Tools ( powered and otherwise) I will need through out this project?
2. what do we do to treat the lawn / grass under the deck? Am sure it'll grow wild in a few weeks
3. Can I plan it in 2 phases, one to do the deck and one to set up the roof?
4. Lastly, for a 14'X12' deck (approx) where can I get a design plan and a List of Materials to purchase and specify at Home Depot / Lowes to minimize my effort and expense.

Any / every ideas are welcome.

Regards,
Adi

__________________
wannabedecker is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On