DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Decks & Patios > Newly poured concrete damage




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 06-13-2012, 06:26 PM  
rafjr64
Junior Member
 
Join Date: Jun 2012
Posts: 1
Default Newly poured concrete damage

Four days ago, we had a patio slab poured. It was windy that day and lots of leaves were blown into the surface. The finishers were able to remove most of them.

However, the wife noticed some small bits of leaves leaves on the surface and took a wire brush to them today (4 days after the pour). She said she did not exert tremendous pressure but lightly brushed the areas. Now those areas have turned white.

QUESTION: Has she damaged the surface of the concrete causing those white spots to remain indefinitely or will those spots disappear?

Note: We plan on staining the concrete once it is fully cured.

Thank you.



__________________
rafjr64 is offline  
 
Reply With Quote Quick reply to this message
Old 06-14-2012, 05:59 PM  
CallMeVilla
Contractor
 
CallMeVilla's Avatar
 
Join Date: Feb 2010
Location: San Diego
Posts: 1,272
Liked 391 Times on 305 Posts
Likes Given: 161

Default

The flouresence sounds like it is no big deal. Let the concrete properly cure, then try a water & brush treatment to clean the surface. Will you be prepping the concrete with an acid wash? If so, the white spots may disappear before you stain the concrete. I would call the stain manufacturer and discuss it (Behr?) with them.

Good luck

__________________
CallMeVilla is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Newly Hung door sagging Msupsic Windows and Doors 5 11-30-2010 11:00 AM
is my concrete poured correctly? (pics) jr2dr Bricks, Masonry and Concrete 6 08-28-2010 06:23 AM
preparing freshly poured concrete for laying slate hvarnado Bricks, Masonry and Concrete 2 08-15-2009 05:49 PM
Vertical Bowing poured concrete wall Shabadoo Framing and Foundation 2 04-17-2009 06:43 AM
Going rate for poured concrete foundation? watersda Framing and Foundation 2 09-21-2007 06:39 AM