DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Decks & Patios > Small hairline cracks in fiberglass balcony




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 06-15-2013, 07:29 PM  
condoowner
Senior Member
 
Join Date: Dec 2009
Posts: 135
Liked 6 Times on 6 Posts
Likes Given: 10

Default Small hairline cracks in fiberglass balcony

Hi, I cant believe that searching the web I could find nothing but forums discussing about boats and kayak stuff, but I have other problems with fiberglass.

I recently cleaned up my fiberglass balcony using only a brush and a garden hose, and I uncovered about 6 or 7 small hairline cracks. Obviously, I am worried about water going inside the balcony and rotting the plywood core which will require replacement of the entire 12x12 balcony ($$$).

Are there any techniques, products or methods to fix these cracks for good?

The structural integrity of the balcony seems intact so I sure hope its only cosmetic for now but I dont want the issue to evolve into something I cant manage.

Anybody?



__________________
condoowner is offline  
 
Reply With Quote Quick reply to this message
Old 06-16-2013, 06:56 AM  
WindowsonWashington
Junior Member
 
WindowsonWashington's Avatar
 
Join Date: May 2013
Location: Washington, DC, Virginia
Posts: 198
Liked 19 Times on 18 Posts
Likes Given: 28

Default

Can you post up a picture?

Is the surface available for a re-coating process with either something like a gel filler or something that we use to re-coat flat roof applications.

If it is not coated with some sort of UV stabilization agent (either integral to the material or a top dress coating), you are bound to get some UV degradation over time.



__________________
WindowsonWashington is offline  
 
Reply With Quote Quick reply to this message
Old 06-16-2013, 07:27 AM  
condoowner
Senior Member
 
Join Date: Dec 2009
Posts: 135
Liked 6 Times on 6 Posts
Likes Given: 10

Default

The surface is flat and accessible as it is located near the end of the balcony but not too close to the railing, so I believe it could be easily repaired or patch.

I really dont know if the fiberglass has integral UV protection agent since the balconies are 8 years old and nothing has been mentioned to the first buyers. I asked the other owners, nobody knows. Lets assume not since I am in Quebec and here, sorry to say, everything is crap.

I can assure you that nothing has been done on the balcony. The previous owner didn't care much and didn't do any maintenance whatsoever.

Important to mention, the cracks are located in a low spot area where water usually ponds after rain and such. These cracks were unveiled after I brushed the dark deposits left by years of ponding and no cleaning..

Attached is a picture of the crack.

I wonder if its still under warranty? Would fiberglass deckings have a 10 year warranty? Ill check my documents in the meantime.

Cheers!

20130616_0922052.jpg  
__________________

Last edited by condoowner; 06-16-2013 at 07:35 AM.
condoowner is offline  
 
Reply With Quote Quick reply to this message
Old 06-16-2013, 12:30 PM  
condoowner
Senior Member
 
Join Date: Dec 2009
Posts: 135
Liked 6 Times on 6 Posts
Likes Given: 10

Default

I went to a local home improvement store and they only had 2 products capable (according to the teenager working there...) of fixing the FG balcony.

One of them was a 2 part liquid. Cant tell exactly what it is but I believe it is some kind of resin that once mixed will cure and harden. The instructions recommended to sand the are to repair with a 80 grit sandpaper.

The FG cloth was sold separately.

The other product was more or less a all-in-one kit with the 2 parts liquids, the FG mesh, a spatula, etc..

http://www.renodepot.com/en/fiberglass-repair-kit-0582014

Whatever I end up using, it needs to be very close to the original deck color (light clay/grey color) and shouldnt show up as a thick layer which will be apparent...

Ideally, since the deck is neither perforated or broken thru, I think only a resistant resin to fill the hairline crack in the gel coat would do.

Agree?

__________________

Last edited by condoowner; 06-16-2013 at 12:35 PM.
condoowner is offline  
 
Reply With Quote Quick reply to this message
Old 06-16-2013, 09:49 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 9,919
Liked 814 Times on 727 Posts
Likes Given: 1407

Default

Fibreglass is just a glass mat and a resin that is two parts, once mixed you have a limited amount of working time.
Find a store that sells this stuff. They will give you instuction and match the colour for you. Get the instruction and do perp work before you buy the material. Usually you want to grind it down to the wood to make sure it is stuck to wood, if there are voids, grind some more, the patch may be bigger than it looks, and everthing has to be really dry when you put the new stuff down.

__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Old 06-18-2013, 03:45 PM  
condoowner
Senior Member
 
Join Date: Dec 2009
Posts: 135
Liked 6 Times on 6 Posts
Likes Given: 10

Default

So I went ahead and did pretty much what you guys suggested. The cracks (most of them) were not all the way down to the plywood. The largest as shown on the picture above, had propagated all the way to the plywood but was pretty much the only one.

I used a dremel tool and gouged the cracks to remove them. Then I used a 2 part FG resin and gently coated the cracks going about 1/2" outside of the crack. I think this may work.

Now my problem (and I suspected it would happen) is that the resin being fairly transparent (kinda maple syrup colored), now you can clearly see the gouges and the resin being darker than the balcony creates a nice dark spot.

Whats my best way to hide the repairs permanently (kinda)? Paint??

__________________

Last edited by condoowner; 06-18-2013 at 03:48 PM.
condoowner is offline  
 
Reply With Quote Quick reply to this message
Old 06-18-2013, 04:37 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 9,919
Liked 814 Times on 727 Posts
Likes Given: 1407

Default

That's why you find a supplier that can match the colour for you, and if you didn't lay some new glass over your patch it won't last. This wants to be scived back about 6" on each side of the crack in a taper to the depth of the crack. When you find a supplier he will have samples to show what you need to do. When I said grin it out I was thinking a belt sander or an angle grinder with 36 grit sandpaper.

__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Old 06-18-2013, 05:28 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 9,919
Liked 814 Times on 727 Posts
Likes Given: 1407

Default

http://www.hl-plasto.com/FibreDeVerre.asp


__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
hairline cracks in my new living room ceiling dan897857 Walls and Ceilings 8 01-25-2012 08:30 PM
balcony floor michelleb Flooring 2 09-05-2011 02:13 PM
Wooden Balcony Caulking? jesuisunique Carpentry and Woodworking 1 09-14-2010 03:11 PM
Hairline crack in exposed aggregate slab danny1951 Bricks, Masonry and Concrete 1 05-30-2010 05:30 AM
Hairline cracks in trim boards bwoody Carpentry and Woodworking 1 01-13-2009 11:18 AM