DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Framing and Foundation > Ceiling Joist Problem




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 09-21-2012, 11:17 PM  
Eddiejr
Junior Member
 
Join Date: Sep 2012
Posts: 1
Default Ceiling Joist Problem

The ceiling in my attached garage is dipping at a seam in the sheetrock. It started gradually, and now is dipping probably 1.5"-2". I suspect the 2"x10"x20' joist is cracked. Is there anyway to brace this with a new joist? A contractor said he would have to take down all the garage door bracing, springs and motor, do the work in the attic, then put the garage door stuff back after the repairs are done.

I'm looking for a "Plan B." He wants about $2,500 to do replace the joist.

Anyone have any suggestions?



__________________
Eddiejr is offline  
 
Reply With Quote Quick reply to this message
Old 09-22-2012, 07:17 AM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 9,778
Liked 803 Times on 716 Posts
Likes Given: 1367

Default

If the garage has a flat roof you don't have many options. If it has an attic with access you might have other choices.



__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Old 09-22-2012, 07:49 AM  
Wuzzat?
Banned
 
Join Date: Jan 2010
Posts: 2,328
Liked 167 Times on 154 Posts
Likes Given: 94

Default

If there is no bridging between the joists, use a lally column to temporarily straighten the broken joist and then slip a new joist endwise into the roof next to the broken one?

Posting photos and drawings from several angles may reveal more options.

Also, get enough bids so they cluster around a price; typically 5 will do.
In this dot plot

http://www.google.com/imgres?q=%22dot+plot%22&um=1&hl=en&safe=off&client =safari&sa=N&rls=en&biw=1093&bih=741&tbm=isch&tbni d=dLWcfcWlFpA6_M:&imgrefurl=http://www.sigmazone.com/Clemens_Bonds_HypothesisTest.htm&docid=u4XZHuRBFmu RsM&imgurl=http://www.sigmazone.com/images/BondsDotPlot.gif&w=550&h=260&ei=r8JdUNntJ4ed0gGHro C4Bw&zoom=1&iact=hc&vpx=605&vpy=85&dur=567&hovh=11 1&hovw=235&tx=165&ty=82&sig=102793154617015424895& page=1&tbnh=93&tbnw=197&start=0&ndsp=13&ved=1t:429 ,r:3,s:0,i:148

they cluster around 0.3. Yours may cluster around several hundred dollars.

Hopefully the $2500 is an outlier on the high side.

__________________

Last edited by Wuzzat?; 09-22-2012 at 07:57 AM.
Wuzzat? is offline  
 
Reply With Quote Quick reply to this message
Old 09-30-2012, 12:35 PM  
BridgeMan
Senior Member
 
BridgeMan's Avatar
 
Join Date: Aug 2011
Location: Cottage Grove, Oregon
Posts: 738
Liked 75 Times on 67 Posts

Default

The quote of $2500 for sistering in one joist is out of line. As others have suggested, get a few more quotes. If nothing shows up more reasonable, consider doing it yourself. Tricky part will be getting a one-piece, 20' member into place without cutting a hole in the roof. Make sure to ask everyone giving estimates how they plan to accomplish that.

__________________
BridgeMan is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Need to find load bearing ceiling joist/stud! BrooklynGuy Walls and Ceilings 3 01-28-2012 08:13 PM
Repair rot/wet joist/header joist dlrh Framing and Foundation 4 09-08-2011 07:31 AM
Problem With Elec. Ceiling Heat kymike HVAC 1 12-13-2010 03:39 PM
Ceiling joist question MattMM Framing and Foundation 2 10-30-2010 08:02 PM
Lowering actual ceiling joist? svanoy Framing and Foundation 6 12-18-2008 10:20 AM