DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Framing and Foundation > Enclose area under house




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 08-24-2014, 10:47 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 9,737
Liked 796 Times on 710 Posts
Likes Given: 1358

Default

When I worked in a treatment plant many years ago, all timber was incised and green poles were if the were fir but most poles were cedar and treated with penta, the brown stuff. Incising a pole was fun, it was like swinging a sludge hammer that stuck where you put it.
But yes treatment might be different for different wood.



__________________
nealtw is online now  
 
Reply With Quote Quick reply to this message
Old 08-24-2014, 10:59 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 9,737
Liked 796 Times on 710 Posts
Likes Given: 1358

Default

The poly wraping the timber on the ground ,I thinjk yes. You wouldn't bring it up onto the sheeting like they did. Your sheeting will want house wrap so vapour can get out.
I think they build all that with treated and you won't need that just the stuff that sits on the ground and could get wet for insurance..

I think we can come up with something to correct the deck. Are the deck boards screw or nailed down? I wiish they had come into the 1900s when they built it.



__________________
nealtw is online now  
 
Reply With Quote Quick reply to this message
Old 08-25-2014, 10:16 AM  
jmg1213
Junior Member
 
Join Date: Jun 2014
Posts: 16
Liked 1 Times on 1 Posts

Default

The deck is nailed.

__________________
jmg1213 is offline  
 
Reply With Quote Quick reply to this message
Old 08-25-2014, 04:52 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 9,737
Liked 796 Times on 710 Posts
Likes Given: 1358

Default

You will first want to have a close look under the deck board from under where they meet the joist against the house and make sure there is no flashing there.
If it's not there you want to open the insulation cover and inspect the rim floor joist for water staining and softness, use a screwdriver or awl if you have something like that. Yes all of it.

__________________
nealtw is online now  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
New to area and little confused gottodo1 Electrical and Wiring 7 04-16-2013 11:02 AM
going to need a pro - Raleigh NC area jgm Flooring 3 09-29-2008 07:16 PM
Need ideas to enclose heater pipes LISAMAYEBAY General Home Improvement Discussion 6 09-27-2008 01:45 PM
san francisco bay area olive Introductions 1 01-24-2007 08:29 PM