DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Framing and Foundation > In a jam




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 11-26-2011, 05:55 PM  
waystay
Junior Member
 
Join Date: Nov 2011
Posts: 1
Default In a jam

We recently had a basement dug for an RTM and a pad poured for a shop and contractor cut some major corners.

The pad for our garrage (32'x48') was a 4" thick slab with no thickened edge. On this sits 12" walls on 2"x6"s. Now that it is all said and done, what is the best remedy that I can have done in the spring time to strengthen up this structure. I was told that all I can do now is wait until spring and dig a 18" x 18" trench around the edge of the building that will lip about 3 inches under the slab, line with rebar and pour a new edge. Is this the best way to save the pad?

In the basement there were no footings under the 3 teleposts. Instead there is a 2" thick 18"x18" cement block that the Telepost is sitting on under the slab. The ground is a rock hard packed sand in the area which is why I think he felt that it could be shortcutted on. With the weight of the house on 3 of these teleposts on the cement block do you think that by adding a center wall (with 12" centers)down the center of the house, that we will be able to offset potential settling enough?



__________________
waystay is offline  
 
Reply With Quote Quick reply to this message
Old 11-26-2011, 07:23 PM  
joecaption
Senior Member
 
Join Date: Jan 2011
Location: Hartfield VA, VA
Posts: 1,361
Liked 38 Times on 33 Posts
Likes Given: 2

Default

For one thing none of that should have ever passed a foundation inspection. None of it comes even close to meeting any building codes I've ever heard of.
If I had of caught him doing that stuff on one of my jobs I'd do my best to make sure it never happened to anyone agin and sent him down the road.
Without a footing below frost level and 24" wide that slab is going to just crack and sink, throwing off the whole building.
Digging under the slab now and trying to set rebar then back fill with concrete is going to be a very expencive and back breaking job, and may or may not work because new concrete does not like to stick to old and there's no good way to force it up tight to the bottom of the old slab, plus what's going to hold the building up while you do it? Your going to have to build temperary walls inside to hold it up.
I'd call some companys that do what's called mud jacking and see what they say about it.
As far as under the coloums now your stuck with cutting out a 24 X 24" hole in the slab and digging it out at least 8", setting rows of rebar on chairs and poring concrete rated for 5000 Lb..

__________________
joecaption is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On