DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Framing and Foundation > Paint-which brand is best?




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 10-09-2005, 12:15 PM  
CharlieMac
Junior Member
 
Join Date: Oct 2005
Posts: 4
Default Paint-which brand is best?

I'm about to paint my living room a chocolate brown color. the walls are white now. I really don't want to do a whole lotta coats of paint. are the more expensive paints really better? is there really sucha thing as one coat coverage? what's the best interior latex paint? and if I want something that can be easily cleaned, what's better? semi-gloss, eggshell, satin or flat?



__________________
CharlieMac is offline  
 
Reply With Quote Quick reply to this message
Old 10-09-2005, 05:15 PM  
Paper Hanger
Junior Member
 
Join Date: Sep 2005
Posts: 25
Default Paint

Wow,Thats alot of questions. As far as paint brand. Remember the old saying " You get what you pay for". I always prefer name brand paints such as Bejamin Moore, MAB, Sherwin Williams, F&H Ect. Every brand also has differents grades. Some grades are better than others. I never just put one coat. It doesnt take that long to do a second coat and I feel much better about my Job. I would also go the next step up from Flat. For example "Satin" You dont want anything to shiny on the walls. Eggshell is good also.
John



__________________

John Aufiero
The Art Of Wallpapering
Give Your Home The Warmth And Beauty You Desire !
[url]http://www.paperyourwalls.com[/url]

Paper Hanger is offline  
 
Reply With Quote Quick reply to this message
Old 10-15-2005, 04:00 AM  
archaicruin
Junior Member
 
Join Date: Oct 2005
Posts: 21
Default

I agree - no matter what brand you use, you have to go with two coats to get the look you want - I like Behr and Sherwin Williams -

__________________
archaicruin is offline  
 
Reply With Quote Quick reply to this message
Old 10-15-2005, 07:42 PM  
FirTrader
Member
 
Join Date: Sep 2005
Posts: 51
Default

Shinier finishes, gloss or semi-gloss, tend to be best durability wise, but show up imperfections quite a bit.. so lower glosses tend to be used. I agree with the others- brand is not so important as buying good paint within any brand... That is, buy the top end latex, with as much acrylic as possible. Sometimes tinting some primer with half the amount of tint as the paint gives a nice base = fewer coats. But as mentioned above, 2 is really necessary no matter what.

__________________
FirTrader is offline  
 
Reply With Quote Quick reply to this message
Old 11-11-2005, 04:39 PM  
Canadiver
Junior Member
 
Join Date: Nov 2005
Posts: 9
Default

I agree with what everyone is saying, over drywall it is best to stick with eggshell or flat to prevent flashing and imperfections that satin or gloss would show more. Buy the top quaility latex in which ever brand preferrably an acrylic ennamal for durability and washability. When applying make sure to roll top to bottom don't stop part way up the wall. Spread the paint evenly and overlap as you you move along, roll back over the area that you have just painted helps to eliminate roll lines.Keep the floating edge of the roller as the trailing edge also helps (thats the opposite side of where the frame attaches to the roller. Dark color over light color will always take a least 2 coats in my experiences.

__________________
Canadiver is offline  
 
Reply With Quote Quick reply to this message
Old 11-11-2005, 08:05 PM  
2pyrs
Junior Member
 
Join Date: Nov 2005
Posts: 23
Default

Sears best flat latex, three dogs, one cat and my son’s friend’s kids. Wipe clean and looks like new.
One coat did ours over a white wall with flat green and white semi-gloss trim. The real trick is to make sure old wall is clean and has no stains – use Kills primer on bad stain areas. Be sure to buy latex trim brush and I like 2” edge brush, roller I like a low mate so it gives a smother finish look to the wall. Fix all holes and cracks prime. Be careful about what type off paint is on your trim, enamel, latex, acrylic they each have there problems. I took a scotch brite pad and fine sand paper over all my wood trim and then damp cloth wipe clean. I buy car painters tape for windows and areas I want no paint to get on it’s cheaper then the blue stuff they sell and you are ready to go.

Have fun

2pyrs

__________________
2pyrs is offline  
 
Reply With Quote Quick reply to this message
Old 04-05-2006, 07:42 PM  
milehigh_woodcrafter
Member
 
Join Date: Apr 2006
Posts: 65
Default

how'd it go? For reference I use semi's in my interiors for ease of cleaning.

__________________
milehigh_woodcrafter is offline  
 
Reply With Quote Quick reply to this message
Old 04-07-2006, 07:52 AM  
Ducttapeman
Junior Member
 
Join Date: Mar 2006
Posts: 9
Default

sounds like everyone had some good tips.
i believe a grey primer is recommended for darker finish colors,

__________________
Ducttapeman is offline  
 
Reply With Quote Quick reply to this message
Old 05-01-2006, 12:05 PM  
woodworkingmenace
Senior Member
 
Join Date: Apr 2006
Posts: 112
Send a message via MSN to woodworkingmenace
Default

I once read, in a magazine about paints...(since I was painting the outside of my house, for I hoped to be the last time), and it said that the more "additives" you have in a paint, the better it is in quality and performance...(like its going to get up and hot rod down the road, right?)..

Well, I did some searching, from Odd Lots, to Sears, to Sherwin Williams. All of them had basically the same ingredients! Sherwin Williams had a few "extra", (now, what that meant, I still dont know, because I am not a chemical expert, but, knew I needed the extras LOL!), so, I bought thiers at 25 bucks a can.

Now, I went the whole nine yards, scraping, and painting first with a primer and then the paint itself. (Supposed to last 25 years, and me with two pacemakers figured I would be dead by then, and not have to worry about painting again)..

Even painted with two coats and, I am dissapointed.
It did last a wee bit longer than cheaper brands, but, not the 25 years that they said it would... So, I shall paint again maybe next year, or the year after...

I guess the moral of the story is that you cant believe everything you read, even from a reputable magazine that you trust...


Just my two cents worth..

Jesse

__________________
woodworkingmenace is offline  
 
Reply With Quote Quick reply to this message
Old 05-01-2006, 06:36 PM  
inspectorD
Housebroken
HRT_MODERATOR.png
 
inspectorD's Avatar
 
Join Date: Dec 2005
Location: Litchfield, CT
Posts: 3,934
Liked 94 Times on 81 Posts
Likes Given: 188

Default If ...

If the paint is peeling off the house it could be from moisture problems and not the paint.
Are the areas that are peeling at any bathroom or areas with no vents in the rooms to remove moisture. I have also seen it where the basement is damp and you have what is called a ballon framed house. This means you can go into the basement and see the studs on the sill plate.(the board sitting on the foundation.)

If this is the case you could paint till the cows come home and it will not stick.
Post me with some answers before you paint .
InspectorD



__________________

Just My
Made in the

inspectorD is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Lead paint on windows cinder Painting Forum 13 05-28-2009 01:44 PM
New paint bubbled... TaskBoy Decorating and Design 2 07-09-2008 02:00 AM
can i paint a formica countertop alicemagooey Decorating and Design 8 01-30-2008 04:39 PM
How to remove paint from brick beezee3 Bricks, Masonry and Concrete 5 10-01-2006 07:07 AM
Vinly Paint - PolymatrX - Siding Classic2 Roofing and Siding 12 08-11-2006 12:44 PM